20 Most Recent
Whirlpool 25.4 Cu. Ft. Side-by-Side Refrigerator w/Thru-the-Door Ice & Water - Satina Stainless-Look - Page 9 Questions & Answers
We have a 25.4 cubic
the clicking is from the lamp relay which makes the lights flicker and its located on the units rear area in the back,without a model number i cant tell what this boards model number is but you need to replace this whole board as they are non repairable(this is usually caused by a power surge or outage,which can destroy these boards,also even if a lamp in the unit burns out this can destroy this board too)
I think I have a water problem? I hear a clunking
Hi.
The clunking noise is the compressor. It usually means that one of the internal mounts that secure the compressor motor is gone. The whole compressor needs replacement.
First ensure that the fridge is at level. A not well leveled unit's compressor can make noise.
If fridge level is OK, call the Whirlpool customer service number listed on manual. The compressor has a long warranty. If the fridge is the one in question you may still be covered for the part.
Regards.
Ginko.
My refrigerator is a Whirlpool Gold, model
This is something it should not happening ...cause they should have a valve for to prevent these..and it is probably frosted...so ..my advice is first to defrost it completely and after you plug it back and freezes ..see if it does this again ..if it does..it means that something obstructs the airflow on that point ...
Freezer unit not working
many possible problems. do you see ice build up. if you do you might want to turn of machine for 24hrs.
I changed the bulb in the refrigerator with a new
There could be a couple of possibilities that I would check. First of all, make sure the bulb is securely screwed all the way in. I would recommend unscrewing it and then screwing it back in to make sure it is tight.
There may also be a problem with the pressure switch that is triggered when the door is opened. Manually push this in and out a few times to see if you can get it to come on. You may need to get the switch replaced.
How do I plumb in this fridge freezer?
It should come with a very thin water pipe with a screw cap on the end. This will connect to a self cutting tap (which you will have to buy). This tap needs to be put onto the pipework of the fresh water mains. (rising main).
We have a Whirlpool side
Try RepairClinic.com. They may have exploded views of the parts for your refrigerator. They also provide detailed step by step help making repairs. You'll need the approxomate date of manufacture, Model #, and serial #.
It freezes everything in both sides then warms up
IF YOU REFRIGE HAS DIGITAL COMPONENTS AND DIGITAL CONTROLS ,MAYBE ,,THE BAD COMPONENTS CAN BE MAIN CONTROL BOARD OR BAD TEMPETURE SENSORS..IF YOU REFRIGE IS UNDER WARRANTY CONTACT WHIRLPOOL TECHNICAL FACTORY SERVICES..
Not finding what you are looking for?