20 Most Recent
Insignia 37" LCD Flat-Panel HDTV - Page 5 Questions & Answers
Screen went blank
Let's cover the obvious.
The TV works fine with other inputs (cable TV), right?
The laptop is plugged into the VGA port on the TV and the input setting is set to "VGA", right? (or does toy computer have an HDMI port that you are using?)
Is it a laptop or a PC?
If it's a laptop and the TV is connected correctly and functioning otherwise, you need to turn on the remote display port of your laptop. It's a key sequence that toggles from laptop -> external -> both.
If it's a PC, it might be a signal incompatibility. Try different resolutions or refresh rates.
Good luck.
Insignia 37" goes into standby mode
I am experimenting with Insignia's and there is a feature whereby if a signal is not detected the TV will switch to standby mode (in about 10 - 15 minutes). It's documented as a tiny "note" in the manual under "Understanding the basics - Turning TV on or off"
I don't know if the TV resumes when the signal is restored or if you need to power on manually.
You are probably experiencing a glitch with the signal or the TV thinking the signal is not there. Are you watching a clear picture when this happens? I would first check to see if the signal is too weak (like using a signal booster). If that is not the case, it's probably the TV acting up.
I hope this helps.
Is this
I have Insignia 37
Check the connections at the back, also check the input source is switched on and connected properly.
HOPE THIS HELPS!!
Losing signal intermittently every 1-5 minutes
This problem is probably due to weak signal strength from the cable to the television. Buy a signal amplifier for you cable line in and use another cable out of the amplifier output to your Television input signal source, This should bring up the signal strength for you.You could also have your cable company check the input signal strength to you house or apartment and see if the cable itself needs repairing or replacing.If this does not help with your problem , then you need to have your television tuners signal input circuit tested it may have weakened from age. This may be adjustable in the tuner box, but this is something for a service technician to determine. customer service number for Insignia is 1-877467-4289. Hope this helps you with your problem
Crown 32
I just restarted everything on my tv and it went away. I know that's not the simplest way to go about this situation, but it got rid of the subtitles! Hope this helps!
My 32 Plasma insignia did not tur on
This unit has had a problem with component failure.The reason the unit does not turn on, is that something in the unit has failed, not allowing the television to turn on.You can reach customer support for Best Buy at this telephone number 1-888-237-8289. The Insignia customer support telephone number is 1-877-467-4289. The Insignia customer support website is www.insignia-products.com. Just go to the customer support section and tell them the model number of your television and the problem you are having. They will be able to evaluate the problem and tell you how to obtain service. I hope this information helps you with your problem.
T.V. turns off by it self right as i turn it on
Your Television is going into the protection mode. This is usually caused by some component failure. You can call Best Buy customer support at this telephone number 1-888-237-8289. They may have in house service for in warranty products. You can also call the Insignia customer support at this telephone Number 1-877-467-4289. The Insignia customer support website is www.insignia-products.com. Go to the customer support section and tell them the model number of your television and ask them for help. You should be able to get help from these sources as they will have all the correct service information for your television. I hope this information helps you with your problem.
Lightning strike and tv picture messed up
This unit needs to be sent or taken in to a service center for complete testing and service. The lightning strike has caused a component failure, in the main board of the television. This is the board that controls all the functions of the television. The customer service telephone number for Insignia is 1-877-467-4289. You can also go to the website www.insignia-products.com. Go to the customer support section and ask them for help getting you television evaluated and serviced. I hope this information helps you solve your problem.
REMOTE CONTROL CODES FOR THE INSIGNIA TELEVISION MODEL: 37" NS-LCD37
This information was found on the Insignia website www.insignia-products.com Under the technical information for the insignia television model: 37" NS-LCD37.
CableVision UR2-CBL-CV04
code:
096
Charter DIGITAL
code:
0463
Comcast M1057
code:
0463, 10463
Cox COX
code:
0463
Direct TV RC23
code:
10463
Dish Network VIP508
code:
720
Dish Network VIP622
code:
720
Motorola DRC800
code:
0463
One for All URC-6690
code:
0464
Phillips PDVR8
code:
115
Phillips PH5DSS
code:
115
Phillips PH5DVD5
code:
115
Phillips PMDVR8
code:
115
RCA RCU807
code:
135
Rogers DCT3250
code:
0463
Shaw DCT3416
code:
0463
Sony RM-VL600
code:
8043
TiVo HD
code:
0091
TiVo SERIES 3
code:
0091
REMOTE CONTROL CODES FOR THE INSIGNIA TELEVISION MODEL: 37" NS-L37Q-10A
This information was found on the Insignia website. www.insignia-products.com under technical information for the insignia television model number 37" NS-l37Q-10A
CableVision UR2-CBL-CV04
code:
096
Charter DIGITAL
code:
0463
Comcast M1057
code:
0463, 10463
Cox COX
code:
0463
Direct TV RC23
code:
10463
Dish Network VIP508
code:
720
Dish Network VIP622
code:
720
Motorola DRC800
code:
0463
One for All URC-6690
code:
0464
Phillips PDVR8
code:
115
Phillips PH5DSS
code:
115
Phillips PH5DVD5
code:
115
Phillips PMDVR8
code:
115
RCA RCU807
code:
135
Rogers DCT3250
code:
0463
Shaw DCT3416
code:
0463
Sony RM-VL600
code:
8043
TiVo HD
code:
0091
TiVo SERIES 3
code:
0091
.
Cleaning my hdtv screen
any store...kmaart...walamrt...radioshack...bestbuy... get electronics cleaner, comes with solution and soft rag...or I just use water and a SUPER soft wash rag....lint free and again SOFT
Insignia ns-lcd42hd screen flutters
This television is having trouble with sync circuits. It probably has some component adding erratic noise voltage to the circuit causing the instability in the sync lock circuits. The solution is to locate the bad component with an oscilloscope by following the signal path with oscilloscope probe until you find the irregular signal and then replace the part. This part could be either capacitors or ringing resistors.It may also be a component in you solid state signal processor. You should have it tested in a service center and see if they can locate the bad components. Then see if it worth replacing with the cost of parts and labor. Hope this helps you with your problem.
Not finding what you are looking for?