20 Most Recent Whirlpool 25.3 Cu. Ft. Frost-Free Side-by-Side Refrigerator w/Thru-the-Door Ice and Water - Satina Stainless-Look - Page 2 Questions & Answers

Sounds like the evaporator fan is not running. Pull the inside of the freezer back off to expose the motor and replace it.

See page 11 troubleshooting of manual. This problem is discussed there. Whirlpool GS5VHAXWY - 25.6 cu. Ft. Refrigerator Use And Care Manual (Page 11 of 37) ' ManualsLib

Click on Part 20, Bi-Metal Defrost. I have never seen one like this before! https://www.partselect.ca/Models/WRT549SZDM01/Sections/Liner-Parts/?ModelID=7185057&ModelNum=WRT549SZDM01&mfgModelNum=&ManufactureID=3&Selected=28E07ECB18AF9AC514E92A1E4DCDBD928C532352&Position=4&mfg=Whirlpool&Type=Washer&Mark=4 ..

If it has a defrost timer, some are adjustable. If not just replace it. https://www.google.com/search?q=Whirlpool+freezer+defrosting+too+often ..

Question edited for clarity, spelling of maker, toss in a load of CAPS. Question moved from Cars and Trucks. Yes they do. https://www.google.com/search?q=whirlpool+et1mtkxkq20 ..

Question turned around for clarity. Whirlpool sell spares including wire baskets https://www.whirlpoolparts.com/Shop-For-Parts/a3b5i554-x676435736861/Gd5sha-Whirlpool-Freezer-Basket-Parts Or places like this https://www.appliancepartspros.com/search.aspx?model=gd5sha ..

Question edited for clarity Zeros (0) and ohs (o) aren't interchangeable in serial numbers :>D If icemakers are going wrong it is best just to replace the complete icemaker unit. They work in a very hostile environment or cold, wet, electricity and limescale and bio-slime. Some commercial icemakers I have witnessed in catering facilities would have you never taking ice in a bar or restaurant again! https://www.google.com/search?q=Whirlpool+MFI26665XEW3+parts ..

WHIRLPOOL WRF40 Solution to this problem!!! very easy ----I assume you have a problem with the control board switching on and of erratic when you pass setting 3 on the LED display, the designers of this fridge left the calculator at home that day, ask a technician to replace the Resistors 5, 6 & 7 (330 OHM 1/4 watt) on your electronic control board with 680 OHM 1/4 watt. This would solve the problems with this board, the LEDs will not be as bright as they were but still highly visible. Questions? [email protected]

As the freezer is working you can probably discount that the reason is low refrigerant gas. The other reasons would be that the fridge circulation fan has failed. or The channel that directs cold air from the freezer is blocked with ice at the rear of the freezer. It happened to my GE and was caused by a failed defrost timer that was icing up the evaporator coils at the back of the freezer. A service call lasts about an hour including melting the ice with a heat gun..

Turn the temp control to max, does the compressor come on? If yes feel the discharge line at the back of the compressor, is it nice and cold? If yes you can eliminate the simple items, make sure all the fans are working inside the fridge and at the rear of the unit. Check to make sure the defrost drain/trap are clear. Let it run for a while, then drop the temp to the usual setting it, and see what happens.

A clue to what the faults were may help you get an answer.

Remove the ice build up at the back of the drawer or something may have fallen over the top edge.. To remove the drawer, lift at the front and pull, or look on the side rail for catches. Please always include full 'make model (what it is)', then we can refer to the owner or service manual.

I would seriously NOT recommend doing this! Trying to run a 110 volt appliance at 220 volts is too much power for the electrics inside the refrigerator (or any 110v appliance) to cope with. You will 'Fry' the electrics possibly even risking causing a fire. Do you have a model or serial number for this refrigerator? You might have to see if you can source one online and import it from the US. That could get expensive! A simple and obvious answer here if the part is so difficult to get, is to buy a whole new refrigerator. Compare the cost of both options as it may be cheaper to replace the whole appliance.

There are several causes for a refrigerator that doesn't cool, including dirty condenser coils, poor ventilation, improper installation, faulty or dirty gasket seals, unorganized food storage, appliance location and malfunctioning internal parts.

Check the circuit board that controls the dispenser. Also, check the wiring and terminals on the control panel. Also, check ice size adjustment function.

Which is not cold the freezer or the refrigerator compartment or both?

Check the wiring and terminals.

The solenoid has nothing to do with the crusher mechanism. Rather it delivers water to the ice tray when empty. Check that the ice door closes completely after ice is dispensed otherwise frost can build up in the crusher blades and prevent them from moving into position. Otherwise, check for a worn out part that connects to the blades and would prevent them from articulating.

send you model number and I will check