Dual 50W x 4 Apple iPod -Ready In-Dash CD Deck with AM/FM Tuner - Answered Questions & Fixed issues

No Simon, that won't work. What you are suggesting is wiring the two horns in series, and that halves the voltage so you would have two horns running on 6 volts. They need to be wired in parallel. A lot depends on how good the horn's relay is and if it can handle the load of two horns. My thought is that it probably will as many vehicles already have twin horns. The positive lead from the relay needs to split and go to the positive sides of both horn, and the negative of the horns to grounds. Ideally, two relays, two horns, two grounds. Look at the YouTube video of the guy that added a huge locomotive twin air horn. It is funny as he goes looking for jay walkers! If I remember he had to install a second battery for it as the load for the air compressor, made the engine stall. ..

GX 1200W 1-Channel Monoblock Class D Amplifier - Phoenix Gold click on manual and download it

You will have to take the CD player apart here in order to get the CD Disc that is stuck inside of the CD player.

Yes. But ... have you knowledge on optimal impedances etc. .......

Audio amps are specialized, the frequency is too low to be used for anything but audio.

You should try on the search engine box on Google car stereo repairs in Arizona then. Jeff's professional Auto repair Arizona and Quality Car stereos Arizona.

videos https://www.google.com/search?q=xdmd9obt+radio+out+of+demo+mode ..

Request the manual directly from Performance Teknique.

Contact Dual directly to request the diagram.

Full wattage or RMS, bridgeable or not .

xerox 5755 serial No. 623959

I have a 2004 dodge ram and once I hook up yellow wire it blows a fuse any help would be nice

I wouldn't, you need an amp that can support a 1.1 ohm load. I don't know of any head unit onboard amp that can!

Hi Chris, from what you said, it would seem like a loose antenna connection problem Review and comment Greetings Franco Dosil Hola Chris, por lo que comentas, parecer?a un problema de conexi?n de antena flojo Revisa y comenta Saludos Franco Dosil http://www.ps2netdrivers.net/manual/dual.xdm6820/

https://www.google.com/imgres?imgurl=http%3A%2F%2Fhncdesignperu.com%2Fwp-content%2Fuploads%2Fford-expedition-stereo-wiring-diagram-gooddy-orgaurus-ses-radio-2001-with-2002-mustang.jpg&imgrefurl=http%3A%2F%2F11.nmmd.eprom-filtertechnik.de%2Flhi%2Fmach-460-stereo-wiring-diagram.html&docid=Ejh8a-5GshYzAM&tbnid=t334_82ynBsfKM%3A&vet=10ahUKEwjQ-rXuvfniAhXET98KHSSmAkUQMwhPKAAwAA..i&w=818&h=1198&bih=333&biw=683&q=2000%20expedition%20amp%20wiring%20colors&ved=0ahUKEwjQ-rXuvfniAhXET98KHSSmAkUQMwhPKAAwAA&iact=mrc&uact=8 look at this diagram it should help

Hi Robert, whenever you put two or more speakers in parallel, the power handling must be equal in each speaker and the sum total of the power of the speakers, must be greater than the power of the amplifier, to avoid breakages due to excesses of power I hope my comment has served you Greetings Franco Dosil Hola Robert, siempre que pongas dos o mas parlantes en paralelo, el manejo de potencia debe ser igual en cada parlante y la suma total de la potencia de los parlante, tiene que ser mayor a la potencia del amplificador, para evitar roturas por excesos de potencia Espero te haya servido mi comentario Saludos Franco Dosil https://www.bossaudio.com/manual/BE4000D_EN_UM.PDF

Check all wiring/connections, fuses, etc. and don't forget the one on the back of the deck itself!

I presume that if it doesn't say so, it ain't so.

Rewire the player to a free (unused) power lug in your fuse box and be sure your ground is connected to something metal instead of tapping into a wire loom.

heres a manual for it,it may help https://www.dualav.com/support/manuals/mxd337bt.pdf