20 Most Recent 2wire Wireless-G 802.11g ADSL Gateway - Page 9 Questions & Answers

0helpful
1answer

Unable to open any page

I think it's better to have this case isolated, since it's happening regularly, I think. Does it say the computer got disconnected from the wireless or does is still have the right address after it stop going online via wireless?
Maybe there is an interference that is causing this issue.


11/16/2008 6:39:33 AM • 2wire Wireless-G... • Answered on Nov 16, 2008
0helpful
1answer

Wreless connection is detected and connected but no internet

Most likely there is a problem with your pc, try turning off your wireless card wait 30 sec. and then turn it back on if it gives you a valid ip which should be a 192.168.... number than there is nothing wrong with the connection, if you are using a windows xp go to start and then run type in services.msc click ok maximize the box scroll down to the bottom you should see wireless zero config, right click choose properties click stop if the service is started click start if it is not, if it says the service is started then click stop and then click start again, then click ok restart the pc if it is vista you are using you will go to your start button->all progrms->accessories->run and then follow the instructions above, if that does not work go back to run (for xp) and type in cmd (for vista right clck on command prompt under accessories and choose run as admin) then in the black cmd box that pops up type in netsh int ip reset resetlog.txt wait and then type in netsh winsock reset restart the pc and attempt to surf , if it is still not letting you contact the pc manufacturer.
11/15/2008 10:41:08 PM • 2wire Wireless-G... • Answered on Nov 15, 2008
0helpful
2answers

MTU setting

Browse to the router's setup page, should be 192.168.1.1 or 192.168.1.0 and log into it. You just have to change the MTU. Put it to 1500.
Once logged in to the router, go to :

Setup
-
Basic Setup
-
Wireless Setup
-
Internet Connection Type
Connection Type = Static IP
Internet IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
Static DNS 1 = 192.168.0.1
Static DNS 2 = 192.168.0.1
Static DNS 3 = 192.168.0.1
STP = Enable
-
Optional Settings (required by some ISPs)
Router Name = client-mode
Host Name = 2WIRE383
Domain Name = [empty]
MTU = Auto
Please remember to rate all users who assist you for free :) I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
11/10/2008 3:03:40 AM • 2wire Wireless-G... • Answered on Nov 10, 2008
0helpful
1answer

2wire wireless

By default, a 2wire modem's wireless feature is already turned on. However the wireless light of that will only be on if a device is connected or trying to connect to it.

check wireless settings for your computer as well
11/9/2008 6:52:04 AM • 2wire Wireless-G... • Answered on Nov 09, 2008
0helpful
1answer

Fix this thing before my 20 oz estwing does......

Below are some links you can check out and see if it would help you make the gaming console connect to the net behind a 2wire adsl gateway.

Nintendo Wii behind a firewall/router:

Port Forwarding on a 2wire gateway:
11/6/2008 3:42:44 PM • 2wire Wireless-G... • Answered on Nov 06, 2008
0helpful
2answers

Used to use a modem.

**** the 2 wire it sucks my balls
10/21/2008 11:48:42 PM • 2wire Wireless-G... • Answered on Oct 21, 2008
0helpful
1answer

I can't get my DS and Wii to work on Wi-Fi with model 2701HG-B

turn up the power and change the wireless channel in the wireless settings
10/21/2008 11:45:57 PM • 2wire Wireless-G... • Answered on Oct 21, 2008
0helpful
1answer

The 2 wire dose not allowme to navagate

You most likely need to update your PPPoE login information.
This will re-authenticate your modem with your ISP
10/21/2008 11:44:32 PM • 2wire Wireless-G... • Answered on Oct 21, 2008
0helpful
1answer

Acer Aspire One [xp can connect to wireless network

Solutions to the problem are varied, however most of the solutions found on the web just mask the problem by simply guiding the user through turning off this notification. Now this solution may work great for systems that are showing a false positive error, but what if the system genuinely has lost its local area connection or the connection is unstable, what then? window.google_render_ad();
1) Your Network or DSL router may have bad or missing information. Powercycle your router and/or rebuild the configuration in your router.
2) Double-check your cabling to the computer. Make sure you have the correct type of cabling, straight-through CAT 5 or possibly a crossover cable and try another cable or test the cable to make sure its working properly.
3) Check your network card to make sure its configured correctly and working properly. Many times setting the network card to 10Mbps/Full Duplex will solve this issue. To do this, open Control Panel, System, Device Manager. Go to the properties of the Network card, click on the Advanced tab and find the Link Speed and Duplex section. Change it from Auto Detect to 10Mbps/Full Duplex.
4) Check and test your firewall. Your firewall, especially if its a software firewall like ZoneAlarm, Black Ice, Norton Firewall or something else could be blocking the connection. Disable your firewall and test the connection. You may have to resolve the problem by even uninstalling and reinstalling the firewall.
5) Check your IP address assignments and workgroup settings in the computer for accuracy. Statically assign IPs to the computers in your network.
6) Reset your TCP/IP stack by downloading and running WinsockXPFix.exe a Visual Basic program designed to fix corrupted TCP/IP issues, host file problems and a variety of other connectivity issues.
7) Also this issue is relate to SP2 update (in that case you should run the Microsoft patch (KB884020) for it.)
10/19/2008 1:34:28 AM • 2wire Wireless-G... • Answered on Oct 19, 2008
0helpful
1answer

2wire 908 has stoped working

You can try to reset the modem by pressing the reset button fo it for 15 seconds while the power is ON or better call your ISP and let one of tech walk you through in checking what is the problem of the modem and reconfiguring it back....

Hope that helps............
10/5/2008 6:12:23 PM • 2wire Wireless-G... • Answered on Oct 05, 2008
0helpful
1answer

Several connection problems

can not get psp online
9/19/2008 10:30:05 PM • 2wire Wireless-G... • Answered on Sep 19, 2008
0helpful
3answers

My wifi password was changed

do not worry you just reset your wifi router it will present on the router there is a image :-
umaair.jpeg
1/30/2020 11:33:55 AM • 2wire Computers... • Answered on Jan 30, 2020
0helpful
1answer

How do i know what wire goes to the alternator on diahatsu feroza 11 4x4 1992

3D Silk Lashes 3D Silk Lashes China Manufacturer Private Label Silk lash Free Sample Factory price for premium 3d silk lashes with our own brand or your Individual brand 3d silk lashes. You can get hot fashionable 3d silk lashes made by 100% handmade Korean synthetic fiber. Our black band and invisible 3d silk lashes is very thin, soft, strong and very comfortable to wear. Shop the best selling lashes http://www.minkfurlash.com/3d-silk-lashes
5/8/2018 5:13:55 AM • 2wire Computers... • Answered on May 08, 2018
0helpful
1answer

Low sginal with 2wire 4011g modem

Are you referring to cable modem with WiFi router?
3/7/2018 3:21:27 AM • 2wire Computers... • Answered on Mar 07, 2018
0answers
0helpful
1answer

A friend gave me old 2Wire 1701HG wireless

That would seem to be AT&T's favorite house brand... Me thinks the SpeedStream was their SLOWEST "DSL" "2wire" was their next iteration of SLOW "DSL" Yes... You will need to contact THEM ... or whom-so-ever is your INTERNET SERVICE PROVIDER (ISP)... As I recall... the PRICE DIFFERENCE from one service to the other was about $10 per month. Give them your pirated modem number and they will need to register it as a digital subscriber in order for you to gain internet access. Carnac the Magnificent
5/8/2017 7:21:53 AM • 2wire Computers... • Answered on May 08, 2017
0helpful
1answer

2wire 1701 hg dsl connection drops when laptop is connected via wireless

This is a known issue with this model.. The power supply is not large enough to handle the extra current that is needed when the unit broadcasts on wifi.
5/5/2017 10:40:22 PM • 2wire Computers... • Answered on May 05, 2017
0helpful
1answer

I am trying to use a qwest 2701hg-d modem with VPN

Real Apple Certified Experts might help you for free - http://bit.ly/2oONirp
4/20/2017 4:02:43 PM • 2wire Computers... • Answered on Apr 20, 2017
Not finding what you are looking for?
2wire Wireless-G 802.11g ADSL Gateway Logo

Popular Tags

203 questions posted

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Ekse

Level 3 Expert

13435 Answers

Brad Brown

Level 3 Expert

18827 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

2wire Computers & Internet

  • 2wire Computers & Internet

Most Popular Question

im trying get internet psp go

  • Computers & Internet
Loading...