20 Most Recent SanDisk 4GB Secure Digital High Capacity Memory Card Questions & Answers

Reformatting will not help you and will lose everything on the card. Furthermore, do not attempt any repairs or data recovery until all other options have been exhausted. Have you tried the card in another Mac? Does a simple drag and drop action to your desktop work, or do you get the same or similar message? Make sure the computer is hard-rebooted and attempt to import pictures from another card. If it fails, problem with program. If it succeeds, problem with card, but this does not preclude trying the above-listed options. Paul Ronco

The SD630 works with MMC and SD cards, 2GB or smaller. It does not work with higher-capacity SDHC cards. Your SDHC card can be used in any camera that accepts SDHC cards.

yes Kodak Z240 accept a 16gb sdhc memory card plese (up to 32gb),go to http://www.kodak.com/global/mul/service/index.html?reqURL=http://support.en.kodak.com/app/home/src/gosupport

click start control panel administrative tools computer management disk management right click on your 4gb drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start i found best results tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive I found that you get best results by ticking one box then returning after it has finished then tick the other box If you need more help with this post a reply hope this helps you

No, format will erase all data. Try doing chkdsk <drive letter> /f in the command prompt.

click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7 click start control panel administrative tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive then you restore it to its default status

Right click on usb drive select properties you will have an array of options

Select the hardware option then select your drive properties policies

restore defaults

In XP

Right click on your drive select properties then on customize restore Default in W 7

you might have to alternate doing this repeatedly until the problem is resolved

hope this helps

click start click on computer to open you should see your drives C: and your other drives cd dvd and your usb drive E: or F: from there you select the photos right click on the photos select copy navigate back to the drive right click select paste or hold the mouse cursor the file/s drag them to destination folder usually my documents my pictures drive then drop them in if you need more help with this post a reply hope this helps

click start control panel administrative tools computer management disk management right click on your 4gb drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive I found that you get best results by ticking one box then returning after it has finished then tick the other box If you need more help with this post a reply hope this helps you

click start control panel administration tools computer management disk management right click on your 4gb memory card select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start or you might tick one box then return after its finished the first then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive click start click on computer then right click on your 4gb memory card select formathope this helps you

I'm guessing that you're trying to format this card in a camera that is likely three years or older. Unfortunately the camera was probably designed before the SDHC format came out. Sorry, but there's no way the card will work in older cameras. It's meant for newer cameras, with high megapixel, and likewise high filesize demands.

On your SD Card, there is a Lock switch. Turn the Lock off to unlock the memory card. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Insure the slide on the left side of the card is in the UNLOCKED position. Make sure that what you will use the card on will be compatible with what is formatting the card. If you are using the card in a camera, let the camera format the card. In a computer, let the computer format it. If this is the first use of the card, make sure whatever device the card is inserted in, it formats the card.

make sure the little switch on the side of the memory card is not in the wrong position. I believe this write protects it and cannot be erased or formatted accidently or even on purpose.

go to How to Format a Write-Protected SD Card '

No.The SD is corrupted.But if you had a friend with a
pC with SD slot you can re-format the SD.

Your camera will accept a maximum SD card capacity of 2GB. It simply isn't capable of handling anything of a larger capacity and in particular is incompatible with the more technically advanced SDHC cards.

Your fix is to either replace your camera with a later model or to stick to using SD cards with a maximum 2GB capacity.

Your camera menu should have an option to FORMAT the card. This will need to be done. If you deleted all files on the card by using a computer, the files may not be completely gone without having the camera reformat the card. It is always most efficient and safer to have the camera do the deleting rather than a computer.

very few of the computers of the age of yours, using Windows XP will read cards larger than 2GB directly in the Card Slots. If you purchase a separate CardReader that is capable of reading SD/HC cards you can connect that to your USB ports and it should read any card up to at least 16GB.

this will say that if win you put the files on it was on a diferant defice that stores the files in a differnt format and the only way to view thim would be on that device your best bet is to press x and go to the folder see if thar is anything in it if it isnot reading it you must reformat it to get it to read it...because it isnot in a readable formate now it may or may not read it on your device...hope ths helps,