Microsoft Xbox 360 Wireless Controller - Page 9 - Answered Questions & Fixed issues
Not connecting
1. On your console beside the power button on the side there is a little button with the 3 (>>>) picture beside of it, press that.
2. Then press the Sync button (>>>) on your controller right on the top of the controller.
3. It will search for like 2 seconds, then detect.
4. Go and enjoy playing.
What happens if you press the sync button on the
There could be a problem with the Controller or the RF unit on the xbox 360 console. Try another controller to make sure its not the RF receiver inside the Xbox 360. Usually when you press the Sync button on either the Xbox or the controller the lights on the X circle should spin and then flash on number 1 and stay a steady green on both the console and the controller
Why does my xbox 360 wireless controllers turn on
if you have a wireless headset, that will cause it to do that as it takes the place of controller1. Unplug the 360 and wait about 10min. unplug the controllers and do a re-learn with the controllers first.
My Wireless controller is not being recognized by
Try using the sync button. Push the sync button on the xbox, then on the controller.
If that doesnt work, get a cord and plug it into the console. One it is connected you can unplug it and shouldnt have anymore problems.
My controller and xbox wont connect
To connect the controller to your Xbox 360 console, follow these steps:
- Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller.
-
Make sure that your Xbox 360 console is turned on. If your Xbox 360
console is not turned on, press the power button. The power button is
the large round button on your Xbox 360 console.
- On the Xbox 360 console, press and release the Connect button. The Connect button is the small round button on the Xbox 360 console.
- On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.
- After the Ring of Light spins and flashes one time on the
controller and on the console, the controller is connected. The
quadrant on the Ring of Light that remains lit indicates the position
in which the controller is connected.
My controller turns on and it just shows a green circle
try pressing the circle button on top of your controller right next to where you plug in your play and charge cable and you should see a little white button hold it and there is another one on your xbox right next to the second memory card slot. Press and hold that one to till both your xbox and controller start blinking and your controller should be fine
New xbox 360 not reading old 360 wireless
It sounds like it needs syncing in. On the controller there is a little button between the LB & RB buttons, when pressed the the green LED ring will light up clockwise.
At the same time press the sync button on the 360, just to the left of the power button, the green LED ring on the 360 will also light up clockwise, after a few seconds both controller and 360 should sync.
Not finding what you are looking for?