20 Most Recent
Sony 2GB Memory Stick PRO Duo Memory Card - Page 9 Questions & Answers
How to connect a sony VCR to a Samsung t.v.
This will depend on many factors such as age of the devices. Both recent, then a HDMI lead will do the trick. Otherwise you will probably talking about a SCART lead. If the TV has only one SCART and it's been used by another device you can get a SCART switching box. From Amazon.
My 8gb memory stick only reads 4gb
click start control panel administrative tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes
automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start
you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive
I found that you get best results by ticking one box then returning after it has finished then tick the other box
if still no joy
Right click on usb drive select properties you will have an array of options
Select the hardware option then select your drive properties policies
restore defaults
In XP
Right click on your drive select properties then on customize restore Default in W 7
If you need more help with this post a reply
hope this helps you
My sony mini hi-fi deck continue to tell me to i
You PUSH the POWER control (OFF) because it is self protecting.
Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on.
Overloads can be from excessive periods of high output or
marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up.
You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is
running as designed (some only operate on demand). Clean dust and debris from it.
If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.
If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'nekkid'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced and competent hands-on tech.
Check for loose speaker connections at the speaker as another possible root cause for intermittent shutdown.
I have a Sony DVD player and the remote which is a
pay attention if it is a universal one ..or it has multiple functions..it may be changed the mode..usually it has buttons with specified device ...press it again to change it to the device u use..o r...remove the batteries and it will get to the original function ..after that ...If it is an universal ..it may be needing setting again (insert code for device )
I have a Sony DAV-HDX675 that says "push power
.. the operator?
Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on.
Overloads can be from excessive periods of high output or marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up.
You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.
If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.
If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced and competent hands-on tech.
Check for loose speaker connections at the speaker as a root cause for intermittent shutdown.
READ REGION 1 BUT I HAVE A DVD FROM REGION2
Hi
Please try below methods to make your Sony DVD player region free--
Method 1:
1. Open Tray
2. Press "Stop" Button on your remote
3. Press "3368"
4. Now you can choose your region
5. Press "0" for region free.
6. Press "Stop" on your remote
7. Close Tray.
Method 2:
Switch player to Standby.
Using remote press 5, 5, 5 followed by Menu.
Hold down 3 for 3 seconds
Method 3:
Open the drive tray.
Enter 9, 8, 1, 7 on remote to access the system menu.
Select region from 1 to 6 or set it to 9 for Multi-region. Macrovision can be disabled from screen.
Hope this helps... Please post back if you need more information.
Daniel
Usb flash drive not working properly
Files on a flash drive canbe corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon andthen click on the flash drive you want to remove and then remove the flashdrive when the computer message says it is Safe to remove.
To restore the flash drive to working order you need to format the flash drive,BUT you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm
www.CardRecovery.com
Not finding what you are looking for?
