Top 20 Insignia 32" 720p Flat-Panel LCD HDTV Questions & Answers


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
Some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement.

Insignia 32"... | 63 views | 1 helpful votes


correction your model must be : NS-32L430A11

its from 2007 or 2008

here full specs for your set

http://www.insigniaproducts.com/products/televisions/NS-32L430A11.html


thnaks

http://www.bostonrecycling.net/

Insignia 32"... | 437 views | 0 helpful votes


You probably need to change some settings on the TV. Make sure you push the remote's "ASPECT" button and cycle through those choices. Then you may want to go into the settings and find an auto-adjust. Also, turn off any and all "LETTERBOX" Settings.

Insignia 32"... | 86 views | 1 helpful votes


It sounds that the white balance adjustment is misaligned. You have to enter its service mode to re-adjust this. If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.
Without any knowledge in electronics, nobody cant do this adjustment correctly. Enter the service mode, if you're confident.

Insignia 32"... | 130 views | 0 helpful votes


what are you using on the HDMI cable. you may need to change the setting on that and not the tv. or you have the tv stuck in Zoom. if it is stuck in Zoom you will need to rest the tv back to factory setting.

Insignia 32"... | 150 views | 0 helpful votes


please check touch key board i think it is defect

thanks lal electronics

Insignia 32"... | 164 views | 0 helpful votes


When you plug in the set, does the standby light come on? Most likely you are dealing with either a failed power supply or main board. I would start with checked the power supply for bulged capacitors.

Insignia 32"... | 185 views | 0 helpful votes


Its in the menu for the set--on screen and is done with the remote---you want to move to antenna/air.

Even if in cable mode it should pick up any active channels 2-13.

Insignia 32"... | 238 views | 1 helpful votes


Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. You can also click the [Home] tab to see the latest updates. It will make search easy. There are more than 1350 posts to different brand TVs now. Pull up older posts there or make a search by typing in the brand name of the device in the "Search Box", at the top right of the display window.

Insignia 32"... | 69 views | 0 helpful votes


If you have tried using different input devices, looked for loose contacts
in power outlet, RC Jack, cable and connectors, the TV might need service.

Insignia 32"... | 169 views | 1 helpful votes


Check and replace its T'Con (Timing Control) board.

Insignia 32"... | 46 views | 0 helpful votes


There will be some heating effect to all LCD TV, as it works. This is not a fault. The back-light CCFL tubes will generate heat.

Insignia 32"... | 32 views | 0 helpful votes


the set selects automatically depending on the signal it is getting.

Insignia 32"... | 122 views | 0 helpful votes


I would need the model number of the set to assist. But I would suspect bad capacitors on the Power supply first.

Insignia 32"... | 122 views | 0 helpful votes


LCD panel damaged

Insignia 32"... | 147 views | 1 helpful votes


check input connections..bad signal or bad tv...u can also try using another tv to check input signal...and u will know if tv is bad gl

Insignia 32"... | 85 views | 0 helpful votes


Most likely the issue is one of the buttons on the TV is stuck. You should be able to verify this with the TV unplugged and then see if all the buttons seem like they have some play to them. When the buttons are pressed you should hear a little click noise. If you find one that doesn't well then there is your stuck button. You would then have to remove the swich from inside the TV by removing the back to disable that function. I hope that helps : )

Insignia 32"... | 215 views | 0 helpful votes


In most cases you there is a "Format" or "Picture Size" button on the remote or through the menu systm of the TV. Find the selection and choose the different formats that suit your picture.

Insignia 32"... | 92 views | 0 helpful votes

Not finding what you are looking for?
Insignia 32" 720p Flat-Panel LCD HDTV Logo

130 questions posted

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Insignia Televison & Video

  • Insignia Televison & Video

Most Popular Question

sound but screen goes black after

  • Televison & Video
Loading...