20 Most Recent Insignia 32" 720p Flat-Panel LCD HDTV - Page 5 Questions & Answers

1. You will need to check the units instruction manual.
This sounds like the LCD TV is in the "timer" mode that is the tv is set for 120, 90, 30 minutes and then turns itself off.
2. It also maybe a circuit built into the TV to protect the electronic components and will shut down the unit when it senses a heat or voltage change ( this can be a manufacturing defect) call the manufacturer and see if this is a recall. Some time the manufacturer will replace the unit even if it is a gift from the company you work for.
The unit has already been purchased and has full warranty status.
Hope this helps.

Insignia 32"... | Answered on Jan 29, 2010

Adjust screen format to get correct picture in tv screen as it sounds tv is set on wrong screen format that makes picture greater then screen size and you get partial picture. Try zoom, full zoom etc until you gets correct size picture that fits best in tv screen.
Screen format option would be under video settings in menu.
Hope this info will help you.

Insignia 32"... | Answered on Jan 12, 2010

If you have connected using the coax (aerial) ten the problem will be that the vcr is analogue and the tv is digital(if you have an older digital tv it should have an analogue tuner so you can set it to analogue and tune to the vcr) I suggest using a scart cable from the vcr to the tv, then you just press av on the remote(on some you can just change the channel down from 1 to the av inputs).

Insignia 32"... | Answered on Jan 02, 2010

Did you call Scientific Atlanta to find out if this could be a software issue in their box, or if there is a failure occurring?
I have had cable boxes do similar things to what you are describing. It turned out to be the box was defective and had to be changed. They were not serviceable. I believe these cable boxes were made by Scientific Atlanta.

Jerry G.

Insignia 32"... | Answered on Nov 14, 2009

simple steps to follow, check your screen setup, regarding pal, ntsc, sceam system, check in both dvd and screen. other options are, check for pal, bg, bk, dk system in your screen. switch thses system while you are playing you dvd. hope it will work. to be in normal seting, both system should be in AUTO mode.

Insignia 32"... | Answered on Oct 25, 2009

You will have a button on the _original_ remote that says Format, Aspect Ratio, Zoom, Size or just AR. It will cycle through Normal, Stretch, Partial Zoom, Zoom, Gray Bar, or the like. You are not in Normal but in one of the Zooms. Stretch is used to make 4x3 movies fill a 16x9 screen, may not be desirable. Zoom is used to fill the 16x9 screen with movies that have been letter boxed. Gray Bar fills the sides of a 4x3 picture on a 16x9 set with gray to "avoid" burn in. Use normal except zoom on LB. -Ken

Insignia 32"... | Answered on Oct 04, 2009

there are two things or a configuration problem, or have a problem with a card but I vote for the configuration

Insignia 32"... | Answered on Aug 20, 2009

may need to re-install channels - power loss results in no time to save/shutdown corretly-like p.c.'s

Insignia 32"... | Answered on Aug 07, 2009

I have a Vizio, I am able to go menu>set-up>picture. In that mode I have vertical & horizontal adjustments that fix that problem. Maybe you have similar choices in your menu.

Insignia 32"... | Answered on Jul 19, 2009

Your DVD player is using a PAL or NTSC variant which is not supported by your display. Somewhere hidden in the depths of the options in the DVD player should be an option to change the composite output type.

Insignia 32"... | Answered on Jul 07, 2009

Ok, so I think I have your solution :)

You're actually my first when it comes to this site, so hopefully this fixes your problem!

Step 1 - Turn off the cable box, but leave the TV on

Step 2 - On the front of the 8300HD, press the "guide" button and the "info" button at the same time

Step 3 - Choose "HD" for High Definition, or "SD" for standard definition. (Sounds like you're HD?)

Step 4 - Choose the aspect ratio 16:9

Step 5 - Choose "progressive scan" if it asks you.

Now press the "power" button on the box, does that fix it?

Insignia 32"... | Answered on Apr 03, 2009

Can you tell me, is the set top box connected directly to the tv? (i.e. not to a surround sound receiver or anything)

Insignia 32"... | Answered on Mar 13, 2009

This could be a lot of things. It might be a cable inside or outside the unit. It may be an edge connection inside on the LCD panel. It may be the boards inside the unit.

Insignia... | Answered on Dec 26, 2020

panel problem

Insignia... | Answered on Dec 06, 2020

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.

Insignia... | Answered on Nov 28, 2020

Not finding what you are looking for?
Insignia 32" 720p Flat-Panel LCD HDTV Logo

130 questions posted

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Insignia Televison & Video

  • Insignia Televison & Video

Most Popular Question

sound but screen goes black after

  • Televison & Video