20 Most Recent Insignia 32" 720p Flat-Panel LCD HDTV - Page 2 Questions & Answers

Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. You can also click the [Home] tab to see the latest updates. It will make search easy. There are more than 1350 posts to different brand TVs now. Pull up older posts there or make a search by typing in the brand name of the device in the "Search Box", at the top right of the display window.

Insignia 32"... | Answered on Dec 04, 2012

Its in the menu for the set--on screen and is done with the remote---you want to move to antenna/air.

Even if in cable mode it should pick up any active channels 2-13.

Insignia 32"... | Answered on Dec 03, 2012

Just unplug your TV from AC mains socket, wait for 15 minutes or so, and then replug it to mains socket and switch on. If this does not help you, do a password reset. If you foget your password just enter '1739' and then change a new one. These two processes don't help you, try an auto retune. this also not helps you, the tuner inside your tv ATSC/NTSC has damaged, and should be replaced. OK.

Insignia 32"... | Answered on Oct 05, 2012

If you have tried using different input devices, looked for loose contacts
in power outlet, RC Jack, cable and connectors, the TV might need service.

Insignia 32"... | Answered on Aug 29, 2012

Check and replace its T'Con (Timing Control) board.

Insignia 32"... | Answered on Aug 15, 2012

There will be some heating effect to all LCD TV, as it works. This is not a fault. The back-light CCFL tubes will generate heat.

Insignia 32"... | Answered on Aug 12, 2012

the set selects automatically depending on the signal it is getting.

Insignia 32"... | Answered on May 30, 2012

I would need the model number of the set to assist. But I would suspect bad capacitors on the Power supply first.

Insignia 32"... | Answered on Dec 22, 2011

check input connections..bad signal or bad tv...u can also try using another tv to check input signal...and u will know if tv is bad gl

Insignia 32"... | Answered on Sep 07, 2011

LCD panel damaged

Insignia 32"... | Answered on Aug 24, 2011

Most likely the issue is one of the buttons on the TV is stuck. You should be able to verify this with the TV unplugged and then see if all the buttons seem like they have some play to them. When the buttons are pressed you should hear a little click noise. If you find one that doesn't well then there is your stuck button. You would then have to remove the swich from inside the TV by removing the back to disable that function. I hope that helps : )

Insignia 32"... | Answered on Jul 26, 2011

In most cases you there is a "Format" or "Picture Size" button on the remote or through the menu systm of the TV. Find the selection and choose the different formats that suit your picture.

Insignia 32"... | Answered on Jul 25, 2011

set your signal type to "cable" or "air" depending on what you are after.

Insignia 32"... | Answered on Apr 16, 2011

First check the AC plug of the television is properly connected to the mains power, if otherwise, it is require for you to open the back cover of the television to check for blown fuses , then if found replace with the same current rating...then if otherwise meaning that
Power supply board is dead.Tries Websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Good luck...

Insignia 32"... | Answered on Apr 06, 2011

Are the lines vertical and the width of a pixelrow? Can you send me a picture to the problem along with make and model? I can research this problem for you.

Insignia 32"... | Answered on Apr 04, 2011

You can go to the Insignia website;

and enter the model of the set to download a manual now. Since you did not give the model number I can not give
more information.
If you have an older model, it may be listed as discontinued..

Insignia 32"... | Answered on Mar 27, 2011

The display panel is bad and to expensive to fix. You can check the board at the top . This is the T con board . Be sure that the flat cables ans pluggin good.

Insignia 32"... | Answered on Mar 21, 2011

Not finding what you are looking for?
Insignia 32" 720p Flat-Panel LCD HDTV Logo

130 questions posted

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Insignia Televison & Video

  • Insignia Televison & Video

Most Popular Question

sound but screen goes black after

  • Televison & Video