20 Most Recent Frigidaire 30" Self-Cleaning Freestanding Gas Range - Easy Care Stainless-Steel - Page 8 Questions & Answers

Make sure there is power present at the socket. If not then the wire must have bad connector some where between the socket to the switch or may be the switch itself is defect. If yes, there is power at the socket then make sure the center touch the end of the bulb. Good luck Mai

the method when converting gasses is to use different jet sizes required for the new gas in use it also means that the air shrouds have to be adjusted to maintain the correct burn ratio and get a blue or colorless flame and a possible adjustment or the pressure regulator Gas is NOT in the domain of the DIY and only a qualified accredited gas fitter should be doing the job

Oven Thermal Fuse part WP3196548 and others How To Replace

Hey friend, I appreciate your post! It sounds like a possible issue within your control panel or a faulty wiring harness. I would recommend seeking assistance from a professional for further proper diagnosis and repair to avoid any unnecessary part purchases. If you need any additional assistance please feel free to reconnect. -Matt

Contact Sears to see if assistance can be found: https://www.searspartsdirect.com/partsdirect/user-manuals/ples389ech-frigidaire-parts-manual

There is an adjustment on the burner or it could be a gas pressure that is too high. What is the model number?

You claim it isn't a temperature sensor, perhaps because there is a working temperature display? I don't know because I am not familiar with your appliance. From your description I expect it is the thermostat thermocouple that is broken and the bare copper wire is actually a capillary tube. Normally a sealed assembly with the thermostat, when broken the thermostat doesn't shut down the oven.

Hello, John - The information here may prove instructive: https://homesteady.com/how-7979236-replace-glass-stove-top-frigidaire.html You can also add the model number of your Frigidaire range by choosing "Comment" and providing the model number so that I or another Fixya.com answerer can provide you with the user manual for your model of glass top range. Best wishes.

If your microwave oven stops working then you should get a professional. It could be that the power is cut off by something like a fuse failure. DO NOT tinker with your microwave oven because they can give you VERY NASTY SHOCK. IT WILL MOST DEFINITELY Electricute you. SOLVED My microwave is not heating but the timer is working Microwave

The element that you see has a filament down the middle of it and it usually is packed with a mineral that can handle the heat The filament moves when it heats and can work its way to the edge of the element wall; Replace the element

Hi

This means a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.
Daniel