20 Most Recent Belkin Wireless-G Plus MIMO Router with USB Adapter and Geek Squad Installation - Page 9 Questions & Answers

its on the router its letters y numbers

to get to the set up page open the search page ( google or the like ) and type in 192.168.2.1 and that will open up the access to the router settings when entering the router /modem code ( from the back of the unit ), you have to enter it exactly as it is case and number specific things like o O 0 ( o is little letter o, O is capital letter o and 0 is number zero) are a source of problems because the lettering is small and confusing so enter what you think it is , then again with the change and again if still not connecting you may have to get the unit manufacturer or service provider to give you the figures for the settings after you get the page open

Is it in direct sunlight? If yes move it into fully shaded area.

The blinking orange power light suggests that there is a problem with your modem. The modem should be plugged into the top ethernet port of your router. Try turning off your modem for 10 seconds and then turning it back on.

The only thing on the cd is usually just a manual. If that is what you need, you can download it here: How to find your Belkin routers user manual

There is usually a small hole on the back or bottom of the Belkin router that you insert a open paper clip into and gently push it in till the unit goes of and starts blinking. It will reset all the settings and passwords to factory defaults. Copy down any important settings you have made before doing the reset.
Thanks for using FixYa

If Belkin is a router , Simply plug an ethernet cable from your modem to the Belkin router in ( WAN Port ) , or in any Switch Port , Configurre you router so that is it the Gateway for all your traffic locally in your LAN , and make the Router WAN interface be that int connected to ur Modem .