20 Most Recent Denon AVR-1513 - Page 6 Questions & Answers


Check this link. It might help you.

Denon Televison... | Answered on Jan 10, 2013


Check the user manual, is it able to play mp3 files? You've not mentioned the model number so, you could try going to the Denon Support pages:-

http://www.denon.co.uk/uk/support/pages/support.aspx

There you should be able to download a guide if needed and/or check whether there are any firmware upgrades to download for your player.

Denon Televison... | Answered on Jun 23, 2012


All the disks I've tried have, although it's only been 3 or 4 (both home-made and original). It sounds like the motor and/or the head moving around. Next week I'll go to the store I got it from and bring a DVD is particularly noisey in the drive, and try it in their floor model to see if it's this particular unit or the model in general.


Parts Of BMW.

Denon Televison... | Answered on May 30, 2012


Usually it is a setting in the menu somewhere that causes this--if all else fails read the owner manual cover to cover.

I have seen several with this issue and all were a setting wrong.

Denon Televison... | Answered on May 29, 2012


Step 1:

Check the light on the remote
, press a number. If the light is on, go to step 4. Not light, then go to step 2.
Step 2:

Check the batteries
Make sure the batteries are full and correct in the remote control. If the batteries are full and correct in the remote control, but the remote still does not work, go to Step 3.
Step 3:

Connect the metal parts

Note:
The lower steps are only for the short remote control, see Fig. Do you have a long remote, go to step 4.

  • Take the battery cover
  • Connect the metal parts with a screwdriver or paper clip.Replace the batteries and check that your remote works again.

    It may be that your remote control needs to be reset for use with your TV.


    Step 4:

    Restart the TV receiver

    • Turn on the television receiver in standby mode by pressing the i-TV (top right).
    • Leave the TV receiver 30 seconds as they are.
    • Unplug the TV receiver from the mains.
    • Plug after 10 seconds into the socket.
    • Turn on the TV receiver by pressing the i-TV (top right).
  • Porsche Parts

Denon Televison... | Answered on May 27, 2012


please clean the contact batteries and spray the contact with special spray contact. Retight the springs for better contacts batteries. See if there are some loose or desolder wire.

Otherwise you must open the remote, and see inside for defective components, or coold solder. Resolder.

sincerely. God bless you

Denon Televison... | Answered on May 07, 2012


Change the HDMI cable, and test on second TV.

Denon Televison... | Answered on Mar 22, 2012

Not finding what you are looking for?
Denon AVR-1513 Logo

Popular Tags

24 questions posted

Ask a Question

Usually answered in minutes!

Top Denon Televison & Video Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you a Denon Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Denon Televison & Video

  • Denon Televison & Video

Most Popular Question

unit not powering

  • Televison & Video
Loading...