20 Most Recent Excalibur Echo3 2 Way Remote - Page 4 Questions & Answers

Hi I have light number 1 and 3 constant on Red on my explora 3A what can it be

Televison &... | Posted on Jan 07, 2021 | Be the first to answer

I lost the lead years ago but bought a new one and the red light has came on on the button on the left hand side but the screen hasn't turned on yet.I have no safety key

Exactly the same problem i am facing too i have searched a lot but no buddy helped me out.
(https://essaysnassignments.co.uk/coursework-writing/)

Televison &... | Answered on Jan 07, 2021

0 Answers

How can I remove the key lock on my GLD TV without a remote control?

Televison &... | Posted on Jan 06, 2021 | Be the first to answer

2 Answers

Como programar un control remoto radox 842

Y cu?les son los c?digos para programarlo en una televisi?n Mitsui Con el control remoto Radox 842

Televison &... | Answered on Jan 06, 2021

1 Answer

Changhong tv board# V500DK2-CKS2 ********* part near center of this board gets very hot. No picture, no sound. Standby light goes off. Could this board be the problem?

That board has large chips on it and you did not say if it is one of the chips that is getting hot. The board has surface mounted parts and they require special tools to work on. An infrared camera is needed to spot smaller components that are overheating and a magnification unit and special rework station to solder parts.

Televison &... | Answered on Jan 06, 2021

0 Answers

I Have a Swann SONVK-2470912-US NVR24-7095 3MP / 3TB / And it Keeps cutting out, I have to power down then it comes back for 20 mins. What can i do to fix this? Do i need another NVR?

Televison &... | Posted on Jan 05, 2021 | Be the first to answer

1 Answer

Sound does not match the picture

That is an issue with your cable box Diane and the company it is connected to.

Disconnect EVERYTHING from the mains supply, router, television, cable / satellite box.

Plug router in first, wait 20 minutes.

Plug in cable / satellite box, wait 5 minutes.

Plug in television.

Turn on cable box and then the television.

Televison &... | Answered on Jan 05, 2021

1 Answer

Have an Aquos LC-60C6400U tv which also had the 2/5 error blinks , and now have a solid standby light but still a black screen . What's my next move?

Best advice is here

https://www.fixya.com/support/r29790007-repairing_own_television

..

Televison &... | Answered on Jan 05, 2021

1 Answer

21v-fw70m has no power

1. Open internal fuse
2. Power supply failure

Televison &... | Answered on Jan 05, 2021

1 Answer

Changhong model ud42yc5500 ua TV. Why doesn't it turn on?

If "Standby light goes off as should" find out what has caused the power supply to fail. Could be a simple as an open fuse

Televison &... | Answered on Jan 05, 2021

1 Answer

My name is Mike. I have a FPE 1506 DV and when I insert a dvd, it tries to read it then displays: "No DVD". It came on suddenly. I would say its use has been moderate. Is there an adjustment I can do?

The player mechanism has failed.

Televison &... | Answered on Jan 05, 2021

1 Answer

My remote control no longer works for a tv L234HED16, I have got a new replacement via Amazon and now a second one but neither functions, thanks.

The sensor or some related component on the TV may have failed.

Televison &... | Answered on Jan 05, 2021

1 Answer

I have a cello 43" 4k smart android tv. C43ANSMT. Went to use the apps ect in tue smart menu and it would not work at all. So I contacted cello and they said it needed an update manually and sent me the usb to install it and still didn't work. It loads so far then wont load anymore. So contacted them again and they say it needs a new mainboard/motherboard. Anyway to fix this without buying a new main board.

If the main board is still functional, it will require a firmware flash and is available only at an authorised service centre.

Televison &... | Answered on Jan 05, 2021

1 Answer

TCL 65S405 LED TV. Why does it boot to Roku startup screen, then goes black after five to 10 seconds?

It's faulty and needs a diagnostic check. A cautionary tale...

https://www.fixya.com/support/r29790007-repairing_own_television

..

Televison &... | Answered on Jan 04, 2021

1 Answer

Condera TV. After 28 seconds on, why does screen show 'power off'?

Overheating or a power supply issue. With the proviso that there is a signal and a picture when you turn it on. Some have an auto-off feature if no signal.

https://www.fixya.com/support/r29790007-repairing_own_television

..

Televison &... | Answered on Jan 04, 2021

1 Answer

HLT-6187s takes too long to come on.

Last time I had a TV that took a long time to boot up, or took multiple attempts, it had bad capacitors.

Televison &... | Answered on Jan 04, 2021

1 Answer

I need a remote control that will operate a SIGMAC LE15AB tv.

Universal remotes aren't suitable to be the primary remote for a tv due to the limited functionality.

Buying a replacement original from the manufacturer is the best option or if unavailable search for a compatible remote. I ordered one from a company on ebay and it cost little more than a good universal.

Televison &... | Answered on Jan 04, 2021

0 Answers