20 Most Recent Excalibur Echo3 2 Way Remote - Page 3 Questions & Answers


Only from the manufacturer and usually only supplied to authorized service centers.

Televison &... | Answered on Jan 09, 2021


No signal. Poor signal. Aerial not connected. No router if a smart tv etc.

Televison &... | Answered on Jan 09, 2021


Contact the manufacturers web site for a user manual.

Televison &... | Answered on Jan 09, 2021


First check the current source (input) on the TV. Without knowing the model of the TV, I can only recommend you first look for a source or input button on the remote or on the front panel of the TV. Press this button multiple times if needed to set the source to TV. Press OK on the remote or Select. (On some TV, just waiting after highlighting the desired input will lead to the switch.)

If you don't see that, see if there is a Menu Settings option on the TV that lets you chose a source. Once your source is TV, see if you can access the Menu sub-section for the RF (coax) tuner settings. Most TVs will blank out the TV antenna/cable selection and channel search options when the source is not TV.

I hope this helps.

Cindy Wells

Televison &... | Answered on Jan 08, 2021


This article here shows you how to fix common harbor breeze remote control problems and where to get replacement parts: Harbor Breeze Ceiling Fan Remote
https://hamptonlightingadvice.com/harbor-breeze-ceiling-fan-remote-not-working/

Televison &... | Answered on Jan 08, 2021


Try resetting all the Picture Settings first.

If that doesn't work, check the connections.

Anything more, read this

https://www.fixya.com/support/r29790007-repairing_own_television

..

Televison &... | Answered on Jan 07, 2021


Exactly the same problem i am facing too i have searched a lot but no buddy helped me out.
(https://essaysnassignments.co.uk/coursework-writing/)

Televison &... | Answered on Jan 07, 2021


Y cu?les son los c?digos para programarlo en una televisi?n Mitsui Con el control remoto Radox 842
7_7_2019_1_27_28_am.jpeg

Televison &... | Answered on Jan 06, 2021


That board has large chips on it and you did not say if it is one of the chips that is getting hot. The board has surface mounted parts and they require special tools to work on. An infrared camera is needed to spot smaller components that are overheating and a magnification unit and special rework station to solder parts.

Televison &... | Answered on Jan 06, 2021


That is an issue with your cable box Diane and the company it is connected to.

Disconnect EVERYTHING from the mains supply, router, television, cable / satellite box.

Plug router in first, wait 20 minutes.

Plug in cable / satellite box, wait 5 minutes.

Plug in television.

Turn on cable box and then the television.

Televison &... | Answered on Jan 05, 2021


1. Open internal fuse
2. Power supply failure

Televison &... | Answered on Jan 05, 2021


If "Standby light goes off as should" find out what has caused the power supply to fail. Could be a simple as an open fuse

Televison &... | Answered on Jan 05, 2021

Not finding what you are looking for?
Excalibur Echo3 2 Way Remote Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Excalibur Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Excalibur Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Excalibur Televison & Video

  • Excalibur Televison & Video

Most Popular Question

excalibur echo remote will not start

  • Televison & Video
Loading...