Blaupunkt Used Original RC-12H Remote Control - Page 9 - Answered Questions & Fixed issues

Insert a thin, flat-head screwdriver beneath the VHS tape inside of the deck. Very Gently pry upward on the tape until it comes free from the tape deck's heads. Grasp the tape with a pair of needle-nosed pliers. Pull the cassette out of the deck.

Televison &... | Answered on Jul 30, 2020 | 43 views

If the picture mode is set to Cinema or Custom, the screen could become dark. If the screen is still dark after the picture quality mode has been changed, change the setting Backlight, Picture, Brightness and adjust the brightness to your taste. ... Depending on such settings, the picture brightness level can be higher or lower

Televison &... | Answered on Jul 29, 2020 | 26 views

Hold down the menu button on the top or side of your TV for at least approximately 10-15 seconds and the screen menu will show up on the TV's screen asking you to enter the time, date and location settings. Follow the onscreen instrucitons, and once done your TV will reset to factory settings.You guys could call a TV repair person to have a look at it.Or it might be dead now and need a new TV.

Televison &... | Answered on Jul 25, 2020 | 43 views

First, make sure that the source is set to TV. (Use the TV button at the top left of the remote to ensure that the TV is being controlled by the remote. The Source button is the one to the right of the Power button on the remote. It's the top button on the side of the TV. ) Next press Menu. (On the remote, it's the button to the upper left of the arrow keys. It's the second button from the top on the TV side panel.) Use the Up/Down arrow keys to navigate to Channel. Press Enter. (Note: the channel buttons at the bottom of the side panel buttons match the Up/Down arrows of the remote. The Source button on the TV is the Enter key.) Press Enter again and use the Up/Down arrow keys to highlight your country. Press Enter. Navigate to Auto Store and press Enter twice. Wait for the TV to go through the channels and test for signal.

You can also add channels manually by using the Manual Store option. If you know the channel number, you would then choose Channel and select C (over-the-air) or S (cable) and then the Right arrow key. Use the arrow keys to highlight the desired channel. Press Enter. Use the arrow keys to select Store and press Enter again. Otherwise choose Search. Use the Up/Down arrows to select a channel. Press Enter, go to Store and press Enter again. Repeat this for each channel.

The manual for the LE26R73BD is available on the support page: . The current link to the manual is

I hope this helps. If you use a set top box with a non-RF coaxial cable output to the TV, the channel option will not be available.

Cindy Wells

Televison &... | Answered on Jul 25, 2020 | 62 views

what you have to do is ring virgin and ask then to send the code.
this code is done stight to your set top box

Televison &... | Answered on Jul 25, 2020 | 885 views

It is probably stuck on boot because it can't go any further due either to an electronic problem or because the software is corrupted.

Televison &... | Answered on Jul 24, 2020 | 36 views

does the power supply board need replacing?
is it damaged beyond repair?

sometimes its better to use other boards for replacement capacitors and other parts (donor Boards) so Basic soldering skills can work if you know how. as for SMD components you'll need to locate a SMD rework station they can range from cheap and nasty through to super expensive. I personally use a Grandma shark (excuse its name) 825D+ and its been very usefull and it was below £100 (127.36 USD) Good luck!

Televison &... | Answered on Jul 22, 2020 | 33 views

Fix an Android device that won't charge or turn on Use the steps on this page to fix the following problems on your phone:
  • Won't turn on
  • Has a black or blank screen
  • Turns on but immediately turns off

Hold the power button First, try holding down your phone's power button for 5-7 seconds. This usually restarts a phone.
Troubleshoot your cable, charger, outlet & case
  1. Use the charger and cable that came with your phone. To check that the charger and cable are working, try them with another device.
  2. Check that the cable is securely connected to the charger and to your phone. Check that there's nothing in your phone's port, like dust or lint.
  3. Plug the charger into a wall outlet. To check that the outlet is working, plug in something else, like a lamp.
  4. Check that no accessories, like cases or battery packs, cover your phone's sensors or press its buttons.

Troubleshoot your battery charge
  1. Plug in your phone with a working cable, charger, and outlet, then wait one minute.
    • If you see a battery icon, your phone is powered off and is charging. You can restart right away.
    • If you see a red light, your battery is fully discharged. If the red light is flashing, there isn't enough power to turn on. Charge your phone for at least 30 minutes before restarting.
    • If you don't see a battery icon or red light after you plug in your phone, the issue could be with your screen.
    Tip: Battery icons and lights can vary by phone. For your phone's details, contact your device manufacturer

Televison &... | Answered on Jul 22, 2020 | 48 views

Factors After Roku Error 003

1. If you haven't modified your Roku system for a long time then that's the only reason you 're struggling with this mistake. And be so patient for the very next time and refresh your Roku system periodically.

2. In addition to the bug fixes, the update also makes your device an error-free one that helps it increase its lifetime.

3. If there is a back end server problem then you can't do anything and you have to wait until the back end server problem isn't fully resolved.

4. Check if the network security protocols are in your Roku. If so, call our helpline numbers now and we will assure you to quickly and minimally resolve the issue.

Crucial Ways to Fix Roku Error Code 003

Seek to change the status of the server
As we have already said, check if there is anything wrong at the server's back end. To learn you've got google and to see if there are any updates relevant to the same. If yes then wait until the problem is not fully resolved.


Televison &... | Answered on Jul 21, 2020 | 152 views

send the real code to unlockek my LG sprint LN240

Televison &... | Answered on Jul 21, 2020 | 29 views

If you require any help to fix Windows Error 80070103 then Dial Windows Tech Support Number 1-800-220-1041 immediately. Our Windows tech support experts are always available to assist you. In such a manner, experts can securitize your system to the greater extent.
How to Fix Windows Error 80070103 Dial 1 800 229 9186 Toll Free

Televison &... | Answered on Jul 20, 2020 | 98 views

Each time you repair flashes of Roku System Error Code 009 you will understand. That your Roku computer has no internet connection. Roku machines address various technological issues regularly, restarting or resetting them.

Shut down your computer after you make adjustments to Settings, and unplug it as well. Plug your computer properly after waiting some time, restart it and connect to a secure network link. If you still face the Roku Program Error Code 009, then don't worry at all just make a message to the technical team.


Televison &... | Answered on Jul 20, 2020 | 140 views

use media converter free download

Televison &... | Answered on Jul 20, 2020 | 836 views

1. Check your wiring connections, one may have come loose.
2. If the set-top box is connected to the television using a coaxial cable, then the television should be set to Channel 3 or 4 to receive the signal.
3. Discharge your TV, unplug your TV and press and hold the "Power" button for 30 seconds. Plug the TV back into the electrical outlet after 30 seconds and check to see if the problem persists.
4. Hit the Input or TV/Video button on your remote to see if there's a signal coming from another source connected to your TV. The input button will shift between a number of cabling connections.
5. Your TV may need a service.

Televison &... | Answered on Jul 19, 2020 | 51 views

It isn't easy and it is getting harder due to most video machines, the vcr and dvd players, mostly producing an analogue output and the modern tv only accepting a digital signal.

Reading the manuals of your tv and video machine might prove fruitful or have a chat with an expert. There are numerous gadgets available claiming to convert analogue to digital...

Televison &... | Answered on Jul 18, 2020 | 48 views

Check cables or antenna. Turn off for a few minutes. Unplug for several minutes.

Televison &... | Answered on Jul 17, 2020 | 26 views

Depends on the media receiver and on the tv.
The modern way with digital media is to hook up using a hdmi lead but older tv sets don't have hdmi sockets, unfortunately modern media receivers don't provide analogue outputs.

With a modern tv it is sometimes necessary to select the input to be used from an onscreen menu.

Televison &... | Answered on Jul 14, 2020 | 65 views

If you are looking for a good kodi addon that allows to watch videos, I recommend to pay attention to Kodi No Limits Magic Build It has a collection of best video and music add-ons. One of the biggest advantages of this Build is that it is regularly updated by developers. I'm sure everyone will find it useful and interesting.

Televison &... | Answered on Jul 13, 2020 | 132 views

Not finding what you are looking for?
Blaupunkt Used Original RC-12H Remote Control Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Blaupunkt Televison & Video Experts


Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

6972 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34506 Answers

Are you a Blaupunkt Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides