Blaupunkt Used Original RC-12H Remote Control - Page 3 - Answered Questions & Fixed issues


I would like to know if the precision flatview TV can come on without a remote or the remote is a necessity
There is a power switch underneath the TV, so I put it on and the screen hasn't come on, there's just a small red light on left corner at the bottom.

Televison &... | Answered 3 days ago | 84 views


Try using the brand "Hisense" in place of Soniq. Worked on Chromecast with Google TV setup... For volume and power it was code 13/13 that worked.

Televison &... | Answered on Oct 16, 2020 | 230 views


Please how can I change my Kangjia kktv K43 43-inch LCD flat-screen TV HD smart wifi network wireless cast screen 40 42 to English language

Televison &... | Answered on Oct 16, 2020 | 1,247 views


You need to press the menu button, and if the menu is displayed, then your input device like a Pendrive, input cable, or HDMI input device is having a problem. However, if you can't see the menu screen, then there must be a problem with the screen hardware.

Televison &... | Answered on Oct 15, 2020 | 12 views


This is a common fault as the set on ageing deteriorates in the connections. There is a high possibility that the components over a period of heating and cooling, tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints that have played on to give you these erratic shut downs or poor performance.

The best way to check for loose connections is to tap lightly when the set is powered on , If there is change while tapping then it seems that there are DRY solder joints. Remove main plug, the covers - with caution of high voltage, check for dry joints, use a good soldering iron to solder all suspected points.

Sometimes the fault occurs when the set warms up, if so you can simulate the heat using a hair dryer on the suspected areas, try with the power supply, distribution, Processor controller, driver controllers on the A/V related sections. Also the use a FREEZE-IT spray can simulate the components to cool and show up the fault.

Based on the above method you must be able to locate the area of fault and solder the sections. Sometimes large IC's- ones with more pins- tend to have drying in some pins and so cause faults related to the IC's protocol. Have a rough idea of looking into the areas to reduce the time of probing.

Televison &... | Answered on Oct 15, 2020 | 911 views


  1. Make sure that the power sources for all your devices with the TV, digital box, VCR, etc.
  2. Check that your TV is set to the right input.
  3. Unplug the power cord from your digital box, wait for at least 30 seconds, then plug it in again.
  4. If you have an HDMI cable connected to your TV you could also try an HDMI handshake.

Televison &... | Answered on Oct 14, 2020 | 28 views


I think this is a reference to a M Series Vizio TV. Here is a Vizio support page:

https://support.vizio.com/s/?language=en_US

Televison &... | Answered on Oct 14, 2020 | 11 views


go into set up and change region

Televison &... | Answered on Oct 13, 2020 | 14 views


check power settings if not set to go off in few minutes then bad power board

Televison &... | Answered on Oct 13, 2020 | 14 views


check input or source

Televison &... | Answered on Oct 13, 2020 | 12 views


  1. Open up the Settings menu by either by using the button on the TV's remote, or if your remote doesn't have a Settings button, press the Home/Smart button,and then click the Settings icon.
  2. Navigate to the Audio/Sound menu.
  3. Choose Sound Out, and then select TV Speakers.

Televison &... | Answered on Oct 12, 2020 | 15 views


Tda11105/v3/3/at8 sarvice code



Televison &... | Answered on Oct 12, 2020 | 1,276 views


Try this method:

1) Take out the batteries from your AC remote,
2) Now hold Power Button + put in batteries.

Wait until it is unlocked, this is tested in Changhong Ruba AC remote, which was locked before.


Thanks & best Regards,
Shakeel A. Abbasi, Sukkur - Pakistan

Televison &... | Answered on Oct 10, 2020 | 108 views


go into set up and turn off parental control or factory reset

Televison &... | Answered on Oct 10, 2020 | 12 views


The SHOWTIME ANYTIME channel is accessible in the Roku Channel Store on all Roku devices. You can connect your Roku player with the SHOWTIME subscription after getting a code and then logging in with the username and password given by the TV provider on their computer.

Televison &... | Answered on Oct 09, 2020 | 15 views


power up
open drawer
enter 9879
enter 0
now multi region

Televison &... | Answered on Oct 06, 2020 | 319 views

Not finding what you are looking for?
Blaupunkt Used Original RC-12H Remote Control Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Blaupunkt Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

6951 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34472 Answers

Are you a Blaupunkt Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...