20 Most Recent
- Page 2 Questions & Answers
The Volume control on the
The pad is worn out! the only solution is take it apart, use a Q-Tip and rubbing alcohol, clean the circuit board and the rubber pad "where the up volume is" and clean the underside of the up button. that might get it working. To take the remote apart, remove the batteries, if you see a hidden screw remove it, next you will need a small flat end screwdriver bigger enough to fit in the crevice " almost snug" next! carefully pry it "clockwise" because there are hidden clips, don't worry if some of the clips break "unavoidable"
Try taking some free time and reading to children at your local library, kills boredom and helps your community.
My Sharp Remote Control Is Suddenly Stop Working
Ok I just dealt with the Sharp customer support for this problem.
1) You need to unplug the TV for 1 full minute and remove the batteries from your remote aswell (this will reset the system)
2) Hold the power button on the remote for 30 seconds with the batteries still out of the remote and the TV still unplugged
3) After the 30 seconds replace batteries then press every button on the remote beginning with the power button in order from left to right and top to bottom (same way you read)
4) Then plug your tv back in and try the remote again.... and the remote and TV should be back in sync.
I have a Wurlitzer OMT-45, the sound is very low. This model has the compact amplifier 40 200 000 00
Hi Gail, this is actually in the wrong category, as this one is for TV repairs but I've worked on many juke boxes over the years and may be able to help but you may get more help if you ask the question in msc electronics category. I assume this is the model 1015 vinyl jukebox. As far as the bubbles, does the bubble tubes light and no bubbles or they're dark, and sound, I need more information there as well, does the record play and no audio at all, or is it low level, if its low level is it distorted or sound normal just not very loud?
Update player to play all blue ray dvd
The firmware updates for the Blu-Ray players are available directly from the manufacturers' websites - I won't be able to give you an exact website, because we don't know your manufacturer or model #. Not all firmware updates will resolve all issues with Blu-Ray playback. For instance, even the most recent updates for the Philips and Sony Blu-Ray players do not allow you to watch every single Blu-Ray - but this could change at any point in the future. Unfortunately, Blu-Ray is an evolving technology, and each studio is using a slightly different version of the Blu-Ray format - this has caused numerous conflicts and playability issues. For my money, the Playstation 3 is the best Blu-Ray player on the market - it is future-proof.
-Tha Mp3 Doctor
Not finding what you are looking for?