20 Most Recent Equator EZ 3720 CEE - Page 9 Questions & Answers

This is an unknown make here in North America. This link may work better for you. Errors that stop washes are generally cause by a lid lock that isn't working, or a drain pump that isn't passing self test. If it works and then throws the error DURING a wash, it is likely to be the 'out of balance' error. https://www.google.com/search?q=scanfrost+top+loader+E5+error+code ..

This is a clutch problem. Or the agitator just need tightening down. Remove the stuff from the top and down inside you will see a deep seated bolt. Tighten it. 'make model (what it is)' in all questions please. Then you can Google make model REMOVE agitator And then do the reverse! ..

See attached.

what to do if display like this

Question edited for clarity, add maker. They are a funny little machine. The disc in the bottom is the agitator. My first thought was that you weren't locking the lid down properly, but if it spins, you are. Unfortunately, it sounds broken. https://www.google.com/search?q=Fuzzy+logic+5.5+kg+top+loader Manual https://www.lg.com/au/support/products/documents/WT-H756.pdf ..

I would check the motor bearings.

Ah, 'MD Start' is the NAME of the maker of a Medical washer, nothing to do with Metal Detecting, one of my other fields of expertise! Contact them direct, as this is not a consumer appliance, and they are based in Paris and we are in North America. https://www.google.com/search?q=MD+start The solenoid in the lock has probably failed. ..

Black grease coming out from under the agitator. There is a bearing seal that is letting grease through from the gearbox.

stuck hot water solenoid

bad start up capacitor on motor

Make and model of machine may help you get an answer

check inside water pump impeller might be bad

https://www.fix.com/models/range/electrolux/id326895/ew30is65jsa/ They offer a manual that should have the code description.

http://www.lecreuset.fr/

It seems like your washing machine is experiencing a common issue after a power outage. This could be due to a disruption in the machine's cycle. To resolve this, try the following steps:

1. Reset the Machine:
   • Turn off the washing machine and unplug it from the power source.
   • Wait for a few minutes (around 5-10 minutes).
   • Plug the machine back in and turn it on.
2. Check Door Lock:
   • Ensure that the door is securely closed and the lock is engaged.
3. Restart the Cycle:
   • Select the desired wash cycle and press the start button.

If the issue persists, it might be helpful to consult your machine's manual for specific troubleshooting steps. Additionally, power fluctuations during the outage might have affected the machine's electronics. If the problem continues, consider contacting the manufacturer's customer support for further assistance. Remember, power interruptions can sometimes cause electronic appliances to behave unexpectedly, and a simple reset often resolves such issues.

The 'blades' on your washing machine? It is called an agitator. Make sure the bolt is tight. If it is it is probably the clutch. There is indeed a washer under the bolt head. 'make model (what it is)' in all questions first 3 words. There are over 40,000 categories to choose from. ..