20 Most Recent
Euro-Pro EP416W - Page 3 Questions & Answers
I have a Euro- Pro
My advice would be to NOT use just any oil but only a highly refined clear oil specific to sewing machines and labeled as such. 3 in One oil is good for some other machines but not recommended for electronic machines. I'm also experiencing rough running w/ my model 9106 after sewing heavy denim material. It now jerks from zig zag stitch to straight stitch and will run w/o the foot pedal being pressed. I'll keep looking for answers.
Where do I get a power cord for a euro-pro mod l 9130C
When buying such power adapters, you typically need to watch for:
- DC voltage - in this case 19V. This needs to be the same.
- DC amp rating - since your adapter is rated at 6.32A, you need a replacement that is rated at a minimum of 6.32A, but there's no harm in going higher. Your device will only draw what it needs.
- DC plug polarity. Most are center positive, as is yours.
- DC plug size. This is defined by inner and outer diameter. In your case, it's 5.5mmx2.5mm
- Input voltage. You haven't mentioned your region, but it's a good idea to get international power adapters that accept 100-240V.
You've stated that you prefer to use the existing power cord, but this is an unnecessary constraint - it's better to use the power cord that comes with the replacement adapter
Not finding what you are looking for?
