Top 20 Brother CS6000i Computerized Sewing Machine Questions & Answers

Hi if the needle is hitting the needle plate you best get in touch with who you bought it from, The needle position is a critical adjustment and is done in conjunction with other adjustments.

Brother CS6000i... | 904 views | 0 helpful votes

Check walking foot does not have any small catching edges. rub with light wet & dry paper.

Brother CS6000i... | 108 views | 0 helpful votes

I'd contact Brother. No guarantees they can fix it over the phone, but I've dealt with them for years and their service has always been topnotch. If they can possibly help you over the phone, they will.

Brother CS6000i... | 77 views | 0 helpful votes

Brother CS6000i... | 253 views | 0 helpful votes

ck fuse in bottom , also there is one in foot pedal as well , but that one wont keep screen from lighting up

Brother CS6000i... | 93 views | 2 helpful votes

Where can I find my Brother machine's serial number?
Where can find my Brother machine serial number Brother

Brother CS6000i... | 131 views | 0 helpful votes

About Undeliverable Packages

Occasionally packages are returned to us as undeliverable. When the carrier returns an undeliverable package to us, you will be issued a full refund (including shipping charges).
Orders that are returned to us as undeliverable are not able to be re-shipped. If you would still like to purchase items that were undeliverable, you are welcome to place a new order on our website.
If it has been four weeks from the estimated delivery date and you haven't received confirmation of the return or refund, please contact us.

About Undeliverable Packages

Brother CS6000i... | 88 views | 0 helpful votes

Your machine is computerized and, as such, are closed systems (difficult-impossible to take the covers off per manufacturer's design). May be worthwhile to take it for service.

Brother CS6000i... | 60 views | 0 helpful votes

The only way I know is a 110/220 volt transformer.
They are available in any electronics supply house.
As I remember the motors in these machines are only two lead, and they put the motor in for the country it will be sold in.
Dual voltage motors have three or four leads (wires).

Brother CS6000i... | 820 views | 0 helpful votes

Hi Emily:
Google this
brother CS6000i Computerized Sewing Machine manual
Then take your pick.

Brother CS6000i... | 234 views | 0 helpful votes Join us ans see if someone knows this answer, there are some very knowledgeable folks.

Brother CS6000i... | 59 views | 0 helpful votes

Joint us and watch the pinned post videos, ask questions, etc.

Brother CS6000i... | 62 views | 0 helpful votes

1. Put one drop of oil on race. The bobbin case has two screws to adjust to keep it from moving either clockwise or counter clockwise. You will need to adjust these. It is tricky but once in the right position it will only move slightly. Give just enough free movement to allow thread to fit through.
2. Adjust the bobbin tension. The screw on the bobbin will need to be adjusted so it has a tension which equals four on the upper tension. This is a little tricky but if you're off a little you can adjust the upper tension to correct this. NOTE: You are trying to adjust the upper tension and the bobbin tension to be equal. This is similar to a tug of war.
3. Try to turn the hand wheel. Watch to see if the needle thread will ride across the top of the bobbin. It should do this without the thread getting stuck. If it gets stuck you will need to adjust the bobbin case screws to allow a little more movement allowance.
4. Replace the needle.
5. If you still notice the needle striking something under the throat plate you will need to have your machine timed.



Brother CS6000i... | 96 views | 1 helpful votes

The quilted fabric may be too thick for the walking foot to move along smoothly. Try using a zipper foot which is much slimmer and can get close to the line of stitching.

Brother CS6000i... | 148 views | 1 helpful votes

Upper or lower tension is too loose I would think.

Brother CS6000i... | 107 views | 0 helpful votes

Make sure you are using the correct needle for your machine! Also check your manual to make sure you are inserting it properly. Some needles are rounded on one side and flat on the other. If you use the incorrect needle it will hit or insert it incorrectly it will also hit and break. June

Brother CS6000i... | 151 views | 2 helpful votes

Yes, call the local dealer. He will probably charge you too much to look at it.

Brother CS6000i... | 480 views | 0 helpful votes

Brother CS6000i... | 160 views | 0 helpful votes

you may have to lower your needle just a "tad". loosen the screw that holds the needle to lower it.

Brother CS6000i... | 82 views | 0 helpful votes

Not finding what you are looking for?
Brother CS6000i Computerized Sewing Machine Logo

371 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Brother Sewing Machines

  • Brother Sewing Machines

Most Popular Question

brother cs6000i went electric storm will

  • Sewing Machines