HOW TO, left off those 2 key words?
Read the manual yet? its free to get and read.
I have AP here too, and access point,
first off we have not a clue as to your homes ISP, your homes SUBLAN, at all ,nor if you have more that one AP access point
this your first?
not router stated, no to what modem and to what ISP
and if the router has a wifi AP also?
on mine I wired the AP 100feet from router using 1 cat5 ethernet cable, nothing works better , in fact on can daisy chain AP points using wired connections. for best speed, for a fact.
your router>>cat5>>>COMfastAP wifi AP to everthing.
using wifi bridge are a PAIN,
1: your router does not support a wifi bridge.
2: the AP (unstated) is too far from the router so all you get is weak signal to the AP and then out the AP same. PAIN max.
because of #1 and 2 we always wire the remote AP wireless first.
spec on yours is (key)
WiFi Standard: IEEE 802.11ac/a/b/g/n
the page is here.
https://comfastwifi.com/how-to-setup
1st google hit no less.
I think they SUX, no real manual
a real manual will show all ways to use bridge mode.
and THEY DONT, so they SUX.
wifi is complex as are bridges. so no manual no buy, no joy.
There are far better products.
if super lucky, and the other wifi AP is close that you are bridging to , it may work easy, per link above (the links is like toy grade instructions IMO)
Rear
