20 Most Recent Datacard SP25 Printer Questions & Answers

Hi, Could you be more specific about your OS, software you are using and driver?

a) You bought a black Supply(check code and catalog) b) You have set your driver to print only black dots(check your driver settings)

need to replace head

Error 01739 means that you loaded a wrong ribbon into the printer. This ribbon is not supported. This

you need consider:
1) it should be no gap between roller--ribbon--card and base when it printing need enough pressure on the card. if not enough pressure it could be printing bad.
2) the ribbon move under the roller might be not normal, to check or adjust it
3) the ribbon near the end, need to change
hope it help you

to fix the problem that is causing the ribbons to brake or the broken ribbon it self?
1. check edge to edge settings in printer toolbox
2. to fix broken ribbon re wrap it straight over the take up spool and use a piece of tape to hold in-place.

There is no power supply in the printer, the power supply is external, nothing user replaceable inside, sounds like you need a new system board, you would be better off trading in for a discount on a new SP25 Plus.
Check midwestIdSolutions.com

it sounds like a driver error try to reinstall the software I’m happy to help further over the phone at https://www.6ya.com/expert/alex_32392698f23d119d

It sounds like your Datacard SD260 is experiencing a problem during the initialization process. Here are some things you can try to fix the issue:

1. Press and hold the "Cancel" button while turning on the machine. This will perform a cold boot and may help reset the machine.
2. Check to make sure the firmware on the machine is up to date. If it is not, update it to the latest version.
3. Try connecting the machine to a different computer to see if the issue is with the computer or the machine.
4. Check for any loose or disconnected cables and ensure that all cables are securely plugged in.
5. Try a different power outlet or power source.
6. If the above steps do not resolve the issue, you may need to contact Datacard for further assistance or service.

It is important to note that, the above steps are general troubleshooting steps, and the actual problem can be caused by different things, so it is best to consult a service manual for your specific Datacard SD260 or contact the manufacturer for more detailed and accurate information.

Follow this Step Sir, i'm sure it Help You with this answer step 1: Open the printer and remove the ribbon cartridge. step 2: Reposition, repair, or replace the ribbon and advance the repaired area one full turn. Step 3: Replace the ribbon cartridge and close the printer. Step 4: Press the User button on the printer. In the message box, click Retry, or click Cancel to cancel the card.

Page 98 of this manual may help you? https://www.manualslib.com/manual/226824/Datacard-Imagecard.html?page=1#manual This is the instruction manual. Nothing about the Print Head though. The contact details are at the bottom. http://www.intraproc.com/downloads/Datacard/SP%2055+/Manual/SP55_Printer_Guide_C_Sep_2004.pdf ..

You can check softpedia.com

you should use embossing support ribbon