Ricoh Aficio GX5050 GelSprinter InkJet - Answered Questions & Fixed issues

Open the web click the top box and make it "blue" by clicking on it (the box with the the www.)and type the IP address into it, click enter. On the web image monitor page sighn in an admin no pass word (upper right) and click address book and you will be able to do it. - Carl

user tool, system settings, admin tools, address book management, delete selected users.

Hi, you can add email addresses one of two ways:

1. Directly from the copier: Press the User Tools button and then go into System Settings. Under the Admin Tools tab, there is a button for Address Book Management (you might have to scroll down to find it). If you go into the Address Book you can select New Program to add a new email address (and add any other information for that address that you want, such as authentication info or a display name). Just make sure to save the address before exiting out.

2. From your computer: You can add email addresses from your computer by opening your web browser and typing in the copier's IP address. The Ricoh Web Image Monitor will appear. It may or may not ask you to log in -- if it does, use whatever username and password you set up. There should be an option for the Address Book on the main page, or you might have to hunt for it, but once you find it you can add new addresses easily.

If you have a lot of email addresses to add, it will probably be a lot easier to do it from your computer than from the copier. Hope that helps!

Go to your list of contacts - select which email address you want to delete and click on it.

That denotes a defective TD sensor. The sensor may need replacing and the developer will need to replaced and initialized with it.

Go to system tools. Admistration tools. manage addresses. select delete then the address you choose to delete.

That is a network or connection problem Has anything changed set up wise ckeck that you have the right driver installed.and check that the physicsl connection is correct

Hi, the email addresses are stored in the copier's address book. To delete one, press the User Tools button, then go into System Settings and go to the Administrator Tools tab. Choose Address Book Management, and a list of all the users will be shown. Choose the user whose email address you want to erase and press Delete. That address will be removed from the address book.

Did you ever fix this problem? I have a GX5050 that just started the same thing.

sc300 is a high voltage output error. The machine detected a voltage level that wasn't where it was supposed to be. If this error only occurs once, reset the machine and it should run fine.

If the error recurs or if you can't clear the error, there is more likely a serious problem. Check the connectors leading to and from your high voltage power supply and your engine board. Sometimes a loose connector can cause this error.

If the problem still persists, there is likely a problem with either the high voltage power supply or the engine board. Contact your local Ricoh dealership (or the company you bought the printer from) to see about getting the machine serviced and the defective part replaced.

On an MP-C4500, envelopes must be printed using the bypass tray (the fold-out tray on the right hand side). Put the envelope in face-down and tighten the two fences so the envelope is snug.

When printing the envelope, make sure the print driver is set for the correct envelope size. If envelopes tend to jam in the printer, try setting the bypass paper type for thick paper.

problem solved by replacing NVRAM on BCU.
thank you for your reply

Need more detail of the problem…when selecting print select print property and advance and select legal and not normal …let me know how that work for you and please do not forget to rate my service so we can improve on it with your help. God bless

user tools system settings copy setting is where you find all the relevant settings unless you are using a fiery then you will have to go into fiery settings for adjustments to be made

The grinding noise is the clashing of gears. The fuser is composed of 2 rollers, a metal or ceramic with a heater inside (bulb) and a silicon roller to apply pressure. The 'hot' roller is geared and the silicon roller can be geared or free floating. There is at least 1 paper sensor in the the fuser to let the unit know whether paper is there and there when it should or should not be. Sometimes, the sensor gets slightly dislodged and can actually cause a jam. If you are hearing a gear clash, the paper is being pushed through the machine and instead of being pushed through the fuser, it stops because the fuser rollers are not turning. The rest of the machine keeps pushing, crinkling the paper.
If there is crinkling, then gears that drive the fuser need to be checked. It is this gear cluster and/or the fuser that need to be replaced.

Hello,

Please refer to your manual on how to install your new power supply. To ensure that your device will not damage or destroyed.

thanks

From Ricoh Aficio MP2550 manual:

Delete destinations registered in the LAN-Fax Address Book:
On the [Start] menu, point to [All Programs], [LAN-Fax Utilities], and then click [Address Book].
The [Address Book] dialog box appears.
If LAN-Fax Driver has already started up, click [Edit Address Book...].
Click [New/Browse...], and then select the CSV file containing the address list to be edited.
Select the destination you want to delete so it is highlighted in the list.
Click [Delete].
Click [Yes].
Click [Close].
If you made changes to a destination, a confirmation message appears. To save the changes, click [Yes].
If you do not want to save the changes and want to quit editing, click [No].
To return to the editing display, click [Cancel].
The confirmation dialog box does not appear when you have not made any changes after starting Address Book.

You can download the manual (HTML or PDF/ZIP versions) from here:
http://support.ricoh.com/bb_v1oi/html/oi/rc2/model/mp33/mp33en.htm

for outlook make a new folder on desktop, open it
also open outlook
and drag and drop all messages in the folder which created

you can get the manual(s) here:

http://www.ricoh-usa.com/downloads/downloads.asp?tsn=Ricoh-USA&path=http://support.ricoh.com/bb_v1oi/html/oi/rc2/model/x2016_20/x2016_20en.htm

Hi,

go in to user tools, system setting, key operator tools or admin. tools. there you can set up password.