20 Most Recent Brother MFC-230c Printer - Page 2 Questions & Answers

Got to the link below:

http://welcome.solutions.brother.com/bsc/public/as/as_ot/en/dlf/download_top.html?reg=as&c=as_ot&lang=en&prod=mfc230c_as

All drivers, software & firmware are available for download at this link:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html?reg=us&c=us&lang=en&prod=mfc230c_us&type2=-1&os=all&flang=all&dlid=

Manuals are available for download at the same link, but you have to click the link in the "Manuals" tab to see them.

it is in front of your printer. you need to open the cover and the ink locks will be revealed. press the locks to unlock and eject your cartridges manually

Follow the link below and you can download the whole CD from this site, make a copy of that using ur CD/DVD writer and reinstall the printer.
http://welcome.solutions.brother.com/bsc/public/as/as_ot/en/dlf/download_top.html?reg=as&c=as_ot&lang=en&prod=mfc230c_as
Hope this will solve the problem

Use the USB Cable supplied with your printer then connect it to your computer....your computer will automatically detect the new hardware then will ask if you have the install CD of your scanner, insert then install.....

Let me know if everything is going fine....

Yes, you just need a standard usb printer cable. The mac will see the printer when its plugged in.
Good luck.

put the back on

The only way to diagnose is to remove covers and trace the noise to the source. It will be a nylon cog that has jammed, moved or become worn. https://www.google.com/search?q=Brother+MFC-L8690CDW+Laser+Printer.+The+scanner+is+making+a+clicking%2Frattling+noise ..

check the continuty in scanner cable to cis unit and check the continuity 2ends off scanner cable. 1.cable problem 2cis problem

http://www.brother-usa.com/FAQs/Solution.aspx?FAQID=200000029767#.U3uq__RDtf0

You can reset the toner cartridges via the printer's menu.

• if an error message appears on the LCD display, press the Cancel (X) button to show the main menu.
• Press the Fax button to make the numeric keypad visible. Then, locate and only locate the Asterisk (Star) button on the numeric keypad. It is important to remember its location as it will not be lit up later when needed.
• Press the Home button to return to the main menu.
• Open the front cover of the printer (to access cartridges).
• With the front cover open, press and hold the unlit Asterisk (Star) button for 5 seconds.
• The reset menu will now appear on the LCD display.
• Scroll through the menu to select a color and yield to reset.
• The LCD will read "Accepted" once the reset is complete.

http://www.zinetic.co.uk/brother_mfc_9140cdn_toner_refill_kit-news.aspx

Try scanning at a lower DPI setting. The machine is only rated to a certain DPI which is how much information it can handle per inch. Lower the DPI the more pixilated an image you get becomes when blown up but unless you are planning on printing 6/4 photos in A3 size then 600-1200 DPI is plenty.

The scanner unit is faulty or the flat harness was not fitted properly to the main board.

There is no such error code. Please check again

Load the envelopes in like paper, tell the printer the size of these to set the paper size, then whatever you're using to print on the envelopes, set up the page size the same size as the envelopes. You should then be able to print on envelopes

Brother MFC 9840CDW 2A error

Replace Fuser Message and Reset Brother MFC 8460 8860 8870 DCP8060

1. Unscrew these three 12.1mm screws holding the control panel in place. 2. Lift up the front panel from the device. 3. Before removing the unit, apply 2 or 3 pieces of tape to secure the top and bottom of the unit. Visit my computer