20 Most Recent Vtech IA5854 5.8 GHz Cordless Phone - Page 6 Questions & Answers

Unlikely to be a 'CELL' phone as they only make Landline phones. Just Erase all your saved Answerphone messages. 'RECorded MEMory Low'.

Rec Mem Low. What Does That Mean? ' Vtech CS6429 Support

https://www.helpowl.com > Vtech > Troubleshooting Sept 4, 2011 - It means that you have too many voice mails stored and you are running out of memory. Delete some of your voice mails to make room for new ... ..

Unfortunately, the old handsets may not be compatible with the new base. The DS6251-2 base only communicates with the DS6250 accessory handset. See the accessory list here: https://www.vtechphones.com/store/pd/4158/DS6251-2-2-Line-2-Handset-Cordless-Phone-with-Answering-System-Smart-Call-Blocker . If the old handsets have been deregistered from the previous base unit, place a handset in the cradle on the base. Wait to see if the handset is registered. Alternately, press and hold Page until you see Registering. Release the Page button. Then press Quiet/# (below 9) on the handset. Wait for the handset to be registered. To deregister handsets from the DS6251 base, press and hold Page. You'll see Registering Please Wait followed by Deregister all devices? At this point, release the Page button. Then press and release Page or the soft key for Yes. I hope this helps. These are shown in the manual for the accessory handset. The manual is on available on the accessory handset page: https://www.vtechphones.com/store/pd/4184/DS6250-2-Line-Accessory-Handset-for-DS6251-series-phones . The current link to the manual is https://cdn-web.vtp-media.com/products/DS/DS6250/DS6250_CIB_V2_20200623.pdf . Cindy Wells

Call forwarding is an add-on feature provided by your telephone company for a fee. Contact the phone company. The V-Tech DS6521-2 has the option of transferring a call between handsets, not to a cell phone. This uses the intercom feature to call another handset. See page 18 of the manual for more information. The manual for the phone is available on the product page: https://www.vtechphones.com/store/pd/4158/DS6251-2-2-Line-2-Handset-Cordless-Phone-with-Answering-System-Smart-Call-Blocker . Expand the Support and Manuals section. The link to the user guide is currently: https://cdn-web.vtp-media.com/products/DS/DS6251/DS6251-X_WEBCIB_V4_20200623.pdf . I hope this helps. Cindy Wells

Page 80 of the manual refers https://www.manualsdir.com/manuals/219464/vtech-ds6322-4-ds6321-2-ds6321-3-ds6321-4-ds6322-3.html?page=80 ..

I just fixed it by unplugging the main line for 20 seconds, then plugging it back in. I unplugged everything on that line - the wall jack seemed to work where the power wires didn't seem to matter. Hopefully it doesn't go out again.

How old is the handset? Batteries last from 2 - 4 years and then can't retain a charge. In most wireless handsets the batteries are easily replaceable. Yours has a NiMH battery pack with a pigtail lead coming from it, google your model number + Battery for replacements

hold the button down for a second or2 longer perhaps

Unplug all phones. Take one traditional 'plug in' phone and connected to the main incoming socket, usually the one closest to the door or fuse box. Does it work? No, phone the telco. Yes, start plugging additional phones in one at a time, testing them as you go.

then buy a new phone we know of no fix

The VTech CS6124 does not have a DND feature. The ringer volume could be set to Off. For the handset(s), press Menu (the big round button below the LCD screen) on a handset when the phone system is idle (no handsets in use). Use the arrow keys (CID/Vol- and Phone Book/Vol+) to navigate to Ringers and press Select (same as the Menu button) twice. Press the Vol+ to increase the volume. You will hear the current ringer volume. Repeat pressing Vol+ until you reach a volume that you prefer. Press Select to save the setting and then press Off to exit the menu system. To adjust the ringer volume at the base, press the Up/Down buttons when the phone system is idle. The manuals are available from VTech's product support page: https://www.vtechphones.com/support/technical-support/product/1516 . The full manual is currently available here: https://cdn-web.vtp-media.com/products/CS/CS6124/CS6124-X_WEBCIB_V7_20190916.pdf . See pages 16-17 (page 23-24 of the PDF). I hope this helps. Cindy Wells

menu*7890#Test handset selectarrow down to "Next Page..." selectRegstr Clear select select again (Reg Clear ?)You get "OK"OffOff (you're backing out of the whole menu)OffOff (You now get "Out of range or no pwr at base"Pull the batteryReplace the battery (you now have an unregistered handset)Thank you, this worked for me and I can now register my old handsets from my lightning struck base to my new base, (of a different model, but it still works.)

Add and register a handset Each newly purchased handset must be registered to the telephone base before use. When first purchased, each expansion handset shows NOT REGISTERED. You may need to charge the phone first. To register a handset:

·Place the unregistered handset in the telephone base or charger. Press Find for 4 seconds. If the headset screen doesn't light up after the 4 seconds. You will need to charge it some more. ·After making sure it is charged set the telephone on the main base again press and hold the Find button for 4 seconds ( until the red light IN USE comes on) Then release the find button. The headset will show PLEASE WAIT; this takes about 10 seconds to complete the registration. The hand set will show HEADSET REGISTERED and the headset number assigned, you will hear a beep when the registration is finished ·When the registration is complete, the newly registered handset is assigned the next available handset registration number. For instance, if you already have HANDSET 1 and HANDSET 2, the next registered handset is HANDSET 3. ·Makes sure no other headsets are in use at the time or the registration may fail. ·You cannot register a handset if any other system handset is in use. Only one handset can be registered at a time.

Delete some voice mails

question?

question not very clear!

Vtech phones namely model cs6729-37.. the worst! You can't see who is calling and you cannot adjust screen brightness. Answer? Buy another phone! I got a panasonic -- same thing -- smaller profile -- 3 phones wireless back to the main base.. and they take AAA's not special batteries. The Vtech has given me hours of aggravation trying anything to get it brighter -- you can't. Don't waste your time and don't buy one -- Panasonic you can at least see who is calling. Why did V-Tech decide to make the LCD screen unreadable? I don't know and I don't care. What a waste of time and money. It's been miserable owning the V-Tech 3 phone system and I should have thrown it out sooner.

If you don't have the owner's manual, try searching the internet for a copy. If that doesn't work, search the internet for Vtech customer support.

I think you can change it go to menu settings go to language and it should have english and just change it to english.

Delete the recorded messages, by pressing the reset switch, or goubg through menus if yiu have a display.