Top 20 Nortel Meridian M7208 Corded Phone Questions & Answers

Press Feature * 3 press the 5th line key you want to use for paging enter the page-all code (feature 601-603 as you wish)

This is interesting. You need to consider things that change during the day. There is a demark point that the phone system connects to. This point may be in a closet etc. What environmental changes are happening near that point> Temperature, humidity, other devices coming on that send out interference etc.

your phone's LCD display is defective and it should be changed. I have a similar problem but till it works that way, I can live with it. Actually I have 3 more with good display - hehe....If annoys you, get a used one from Amazon for 44 USDhttp://www.amazon.com/Nortel-Meridian-M7208-Telephone-Gray/dp/B0018JVOP2Sending it to repair might cost you more.

It may be programmed not to work. See your office mgr.

There is no outgoing (microphone) volume control, if it is only your set try the handset from different extension. The microphone element may have been damaged (especially if dropped) and have to be replaced. Replacement handsets are not hard to find. If everyone on your system claims that callers cannot hear them, there are some settings on the central switch (KSU) which might help, but only after ruling out a problem on your particular set.

Is it programmed to ring in configuration programming

I don't know what "enimes" is, but that's the standard for those phones. I don't think it's changable unless the entire system is changed.

Feature # 4 F4 forward to: F#4 cancel forward

It might be that your pick up key is mislabeled/programmed. Press feature * 0 then the pick up key to identify what the feature is on the button. If it's not pick up, exit out of button inquiry press feature * 3 the button you want to program (pick up) then press feature 75 That will program it as a group pick up key

Hi j, Conundrum. Did you get the park code by pressing feature 74? You can try retrieving the call and hanging it up that way. :)

Feature 983 Password: 1020000 Mbox: Enter the mailbox number that is locked Press Reset after Password displays Password will now be 0000.

Programming for the voice mail is done on M7310, M7324, or T7316e sets. Try finding one of these sets around the office to do the administrative programming.

it locked me out and need new password

Hard to answer because your problem description does not match the part.Nortel Meridian M7208 Corded Phone is a digital phone which works off a phone system.Also note that the carrier controls the rollover, not the phone or its system.Once you have more/proper details maybe you can be helped.

Feature * 3Press that buttonFeature then 0If still an issue then do F * 0 and press that button, need to know what is says on the display as you cannot override Lines,Intercoms, Handsfree, Huntgroup keys.

This is a system setting so you may need your office admin or tech to program via password.F**TIME

BUSH THE MUTE BUTTON.

please read carefully your instr.manuals or download from www.fitness.manualsonline.com or www. retrevo.comGod bless you

Hi,

Sounds like the FNA (forward no answer) on the phone is not setup.

Press feature **266344, then the installer password. Under Terminals and Sets, CFNA is under Capabilities.


Press Ftr985, and in the display you will see the Vmail DN. Enter Norstar programming and make sure the problem DN is CFNA to Vmail DN.

Let me know,once done so that we could proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Hi Evygal,

There is nothing to worry about it because this phone supports a speed dialing feature , which means that you can program the numbers in a way that just pressing them in a specific way usually for some more time than a usual press of a button will automatically enable the speed dial function and the phone will call the number that has been programmed on the digit.

A good idea to not face this problem is to quickly remove the finger off the button when you press it , because keeping it for long , just as long as one sec can enable this speed dialing feature.

Hope that helps ..:) Let me know in case you have any queries, would love to help you.