20 Most Recent Nortel Meridian M7208 Corded Phone Questions & Answers


Check the handset cable and make sure it is not plugged into the headset port. You should also try picking up the handset while on a call, make sure your HF button is not lit, wait a couple of seconds, then hang up the handset. If that doesn't work, then you should try looking in programming to see if there is a problem there.

Nortel Meridian... • Answered on Jun 01, 2020


Press Feature * 3 press the 5th line key you want to use for paging enter the page-all code (feature 601-603 as you wish)

Nortel Meridian... • Answered on Oct 12, 2017


This is interesting. You need to consider things that change during the day. There is a demark point that the phone system connects to. This point may be in a closet etc. What environmental changes are happening near that point> Temperature, humidity, other devices coming on that send out interference etc.

Nortel Meridian... • Answered on Jan 24, 2017


your phone's LCD display is defective and it should be changed. I have a similar problem but till it works that way, I can live with it. Actually I have 3 more with good display - hehe....If annoys you, get a used one from Amazon for 44 USDhttp://www.amazon.com/Nortel-Meridian-M7208-Telephone-Gray/dp/B0018JVOP2Sending it to repair might cost you more.

Nortel Meridian... • Answered on Nov 24, 2015


Is it programmed to ring in configuration programming

Nortel Meridian... • Answered on Aug 20, 2015


Programming
memory buttons
External autodial
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 1
3. Press a memory button.
4. Dial the external number.
5. Press Hold to store the number.
6. Label your new button.

Internal autodial
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 2
3. Press a memory button.
4. Dial the internal number.
5. Label your new button.

Features
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 3
3. Press a memory button.
4. Press Feature and the feature code.
5. Label your new button.

Erasing memory buttons
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 1
3. Press the memory button you want to erase.
4. Press Hold to erase the button.

Nortel Meridian... • Answered on Apr 18, 2015


Feature 983 Password: 1020000 Mbox: Enter the mailbox number that is locked Press Reset after Password displays Password will now be 0000.

Nortel Meridian... • Answered on Feb 06, 2015


Feature # 4 F4 forward to: F#4 cancel forward

Nortel Meridian... • Answered on Feb 02, 2015


There is no outgoing (microphone) volume control, if it is only your set try the handset from different extension. The microphone element may have been damaged (especially if dropped) and have to be replaced. Replacement handsets are not hard to find. If everyone on your system claims that callers cannot hear them, there are some settings on the central switch (KSU) which might help, but only after ruling out a problem on your particular set.

Nortel Meridian... • Answered on Feb 02, 2015


It may be programmed not to work. See your office mgr.

Nortel Meridian... • Answered on Jan 26, 2015


I don't know what "enimes" is, but that's the standard for those phones. I don't think it's changable unless the entire system is changed.

Nortel Meridian... • Answered on Jul 01, 2014

Not finding what you are looking for?
Nortel Meridian M7208 Corded Phone Logo

161 questions posted

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

Cindy Wells

Level 3 Expert

6259 Answers

Brad Brown

Level 3 Expert

18665 Answers

k24674

Level 3 Expert

8092 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Nortel Lands Phones

  • Nortel Lands Phones

Most Popular Question

our phones working fine without incident

  • Lands Phones
Loading...