20 Most Recent Frigidaire Freezer GLRT183TD - Page 7 Questions & Answers

The solenoid that opens the flap is not working. You'll need a repairman to get to it .

Nothing will work except for light . If you wait until it should time out of defrost

bad display unplug for a few minutes try again if nothing happens change the display membrane

Might need a freon top up. If the compressor is functioning there may be in sufficient freon . This can be topped up. A repairman/technician can diagnose this fairly quickly

Hey friend, thank you for your post!

In order to stop the door ajar alarm from beeping when the door is closed you would need to reset the alarm. If you have done that and it continues to beep it could be an issue within the switch or panel of your Frigidaire freezer. I would recommend having a professional come out to properly diagnose your appliance. -Matt

Hello Lee, thanks for your inquiry! I see that your Frigidaire deep freezer is not running and you would like to know why you are having these issues. It could be a possible miscommunication within your control panel or sealed system. I would recommend performing a reset on your freezer and you can do that by unplugging the power cord for at least ten minutes. If that does not help resolve your issue I would suggest having a professional technician out to perform a proper diagnosis and repair. Hopefully this is helpful. -Matt

I appreciate your post, Deborah!

From what you have described you need to replace the door light switch on your Frigidaire freezer. In order to assist you further I would need your model number. You can locate your serial tag (which lists your model number) on the inside wall of your freezer. I look forward to assisting you. -Matt

Hello Shirley, thank you for you post!

I understand that your Frigidaire freezer is leaking water onto the bottom panel of your freezer. This could be a possible clog within your drain line or an issue with your gasket. I would recommend performing a manual defrost on your freezer and you can do that by disconnecting power from your freezer for at least four to five hours. This will help clear out any clogs within your freezer.

You may also want to test your gasket and you can do that by using a dollar bill. Place the bill between your freezer and the freezer door. If you pull the bill and it provides resistance the gasket is good. If the bill slides out you may need to replace the gasket. It that all checks out to be in proper working order I noticed you wanted to access the drain tube. In order to access the tube you would have to remove the rear panel wall. This is not a simple DIY job and I would recommend reaching out to a professional for proper diagnosis and repair. I hope this information is helpful to you. -Matt

Thank you for your post, Linda!

I see that you are having difficulties with your Frigidaire freezer, LFFU14F5HWC, changing on the display and the inside light is flashing off. This sounds like a possible problem with your panel or socket. I would recommend performing a reset on your freezer and you can do that by unplugging the power cord for at least ten minutes. If this does not help correct your issue I would suggest having a professional technician out to perform proper repairs. This will help you avoid any unnecessary part purchases. I hope this information is helpful to some degree. -Matt

Hello Whywhywhywhyshame, thank you for your post!

Based off the information you have provided the temperature alarm on your Frigidaire freezer will not stop going off. This sounds like a possible problem with your sensor or control panel. I would recommend performing a reset on your freezer and you can do that by flipping the household circuit breaker off for at least ten minutes. If that does not help resolve your issue I would recommend seeking assistance from a professional technician for proper diagnosis and repair. Hopefully this information is helpful. -Matt

The green light should be a normal running light and the other one, either yellow or red(ish) should be a high temp alarm. Check the contents to make sure they are still reasonablly frozen and if not start finding the cause....Is the condensor fan motor running correctly? Is the condensor coil clean and free from dirt/lint/fuzz which serves to restrict the transfer of heat? Is there an excessive accumulation of ice build up indicating possibly a problem with the automatic defrost cycle?

http www searspartsdirect com frigidaire freezer parts model FFU12C2AW0... FFU12C2AW0 FRIGIDAIRE FREEZER Manual 12.1 cu. ft

Checking air flow to the hear exchanger, is the compressor getting hot to touch, are there any kinks in the pipes, does it get cool at all? otherwise, a re-gas is the next step.

The thermostat could cause this fault or it could have lost its gas . A fridge mechanic could test it for you. Not much a lay person can do with out tools. May best to buy a new one.

Stuck in defrost check the timer you can use a flat blade screwdriver to advance it if it is not digital

nope, there is no pressure switch in freezers like those found in a car A/C unit what is the model

model please from the tag