20 Most Recent AT&T 8925 Tilt Smartphone - Page 2 Questions & Answers

Firstly i doubt that your phone battery is damaged. To check this please go to your nearest mobile Service center & check for battery life. If it is damaged then you have to replace the battery to new one. If your phone is within the warranty period, your battery replacement will be done free of cost Else you have to bare the cost. Ther is also a possibilty of your phone chager to get damaged. Please check for the same with other compactible phone.

Either your charger is not working or your battery in the tilt is bad. Have someone take a voltage measurement on the cord from the charger.

What's the brand and model number of your phone? Is it a Kaiser?

Try soft resetting the phone by removing the battery and leave it out for 5 minutes and put it back on.

If you get the same problem and if I assume correct, you may check the link below and see if that helps:

http://forum.xda-developers.com/showpost.php?p=1562803&postcount=1

Please let me know if you have any additional info.

Thank you and have a good evening!

Try a factory reset.

Here is a walkthrough on how to do this.

WARNING: THIS WILL ERASE ALL DATA STORED ON THE PHONE.

It sounds like there was an interrupted attempt to run an SPL unlocker.

Try performing a factory reset and see if this will resolve the issue.

You can find a walkthrough on this process here.

WARNING: THIS WILL ERASE ALL THE INFORMATION ON THE DEVICE.

If that doesn't resolve the issue, you can try running an SPL unlock again.

You can find a walkthrough on that process here.

Try performing a factory reset.

Here is a link to directions on how to do this.

WARNING: THIS WILL ERASE ALL INFORMATION ON THE DEVICE.

download and install activesync from http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx

AT&T is locking the sim cards on go phones to the imei number of the phone was purchased for 4 months...you can not use a sim card from a go phone in another phone during that time frame.

Short of doing a hard reset...no. To do a hard reset take out the sim card and memory card (if you have one) hold the 2 soft keys (the keys about the internet "e" and the messanging "letter"...hold those keys in while pushing the soft reset button (to the right of your usb connector) with your stylus. Follow the directions to reset the phone.

Check your sim card. If you have an old cingular card. You need to update your sim. Or your phone will need service.

try doing a soft reset to the phone

yup 6.1 can be a resource hog

go to programs | file explorer | windows | startup

Look to see what you can delete ,,,,, less overhead is gunna give you back the speed ..

There is a lot of support on the net although I have not done that phone I have had to tweak many 6.1 users phones
LB

then we can fix your other issues
remember to write down your changes so you can ,,,,,, ya know

if you dont mind loosing everything thats stored then you can do a "reset" .. hold down all three soft keys for several seconds .. a white screen should come up that indicates that its reset ..that should get it working again .. there are several other more complicated ways to do a hard reset if that doesnt work ..

You need to get the proxy settings from your service provider then.

Start -> Settings -> connections -> connections

There should be a link named: set up my proxy server
enter the proxy server there.

You can hard reset the device which will bust past this flimsy password.

To do this:

Press and hold the left and right soft keys under the screen while you push the reset button on the bottom of the phone with the stylus or a similar object.

yes we can unlock u just join me on yahoo massanger : cellularhut_rajan

This could be one of (at least) two things.
Screens have a digitizer built in. Your digitizer could have blown out, or your connector could be loose/corroded/moist.
Fixing any or all of these involves opening your mobile. Have it serviced. If you do it yourself, you WILL violate your warranty, guaranteed.
If they determine that the screen/digitizer unit is nonfunctional, do not let them sell you one! Order one off of eBay, from Hong Kong or wherever, which'll run you around $26 to $30 U$Dollars. AT&T or a service place charge like $200.00 for the same item!
Hope that helps. Best of luck! :-D

Once you are on a call, the interface on the touchscreen should change. The number buttons go away, and are replaced by several other buttons. One of those says "Speaker On" which turns your speaker on, happily enough. Or should, obviously.
Hope that helps. Best of luck! :-D

This is a very odd problem with an even "odder" solution. When this happened to mine, I found a website that told me the following. I swear it works... eventually... probably.
Take the back off and just set it aside for a few minutes.
Now, remove the battery, and then put it back in, and then press the power button. If that does not do it, repeat the process...
... like 20 or 30 or 40 times. Eventually, the unit will make a (scary sounding) "pop" noise, and should turn on as normal.
I have had 3 Tilts. (I tend to be hard on phones.) Of those, two have had the "death" issue. Both were resuccitated this way, and worked just fine afterward.
Best of luck! Hope that helped. :-D

try this http://www.htc.com/us/faq_detail.aspx?p_id=67&act=um