Top 20
Kinderkraft Vermont Crib - Page 2 Questions & Answers
Is there anywhere I can get the hardware for the
Hello, this is Products America! We are your crib hardware specalist. We should be able to help you with the hadware for your KinderKraft crib. We are open M-F 8 am-6 pm CST. Our contact numbers are 800-205-9642 or 800-772-1041. We look forward to speaking with you!
You may also visit us at
www.productsamerica.com.
I need the left and
Hello! This is Products America! We are the crib hardware specialist! We may be able to assist you with your crib hardware needs. Please contact us at 800-205-9642 or 800-772-1041. We are open Monday through Friday 8am-6pm CST. We look forward to speaking with you!
You can check out our website at www.productsamerica.com.
I need Part #1048-Inert Nut 1/4
I think you mean "insert nut"? Is this a internally threaded metal sleeve that came out of the wood? If so, you don't want to repair this crib. When that fell out, it most likely damaged the wood around it and it has compromised that hole. Putting a new insert in to the hole will not necessarily work, and the new one will pull out as well. I wouldn't use the crib. Too many deaths in cribs where someone attempted a repair that didn't work.
Recall
yes, it has been recalled.
I just got this bed out for my new baby i just
I am not sure where you got the information regarding a recall on the Kinderkraft crib but to our knowledge there have not been any recalls, past or present, on any of the Kinderkraft cribs. The recent recalls have all involved the plastic hand release trigger hardware and that is not what Kinderkraft was using. You can go on to the Consumer Product Safety Commisions website at
www.cpsc.gov for a full listing of all crib recalls to be sure.
Has your kinderkraft Crib been affected by the
Hello. The type of hardware Kinderkraft was using is not part of the recall. The recall is regarding the two hand trigger release plastic hardware. What Kinderkraft used is the lift and push type plastic hardware which as of yet has not had any recalls.
11/25/2009 8:39:48 PM •
Kinderkraft...
•
1,477 views • 15 helpful votes
Need new screws
Just a suggestion, the way I'd do it is to get a screw that isn't missing, go to either Lowes or Home Depot and see if they can get you a screw that is the closest match.
If you have no screws, measure the hole for the screw in the crib. Take a pencil, skewer, or anything thin and mark the depth of the hole to determine how long of a screw you need; and also the width of the hole itself. Again, at either store, find the screw that best fits. Since it is a crib and you do want it to be sturdy, go for a thick screw. It's ok if its just a tiny bit wider because then it will grip better. Be careful not to get it too big as it could crack the wood.
Good luck and please rate my solution accordingly.
V/r,
Don
I will be useing a
The type of hardware Kinderkraft was using is not part of the recall.
The recall is regarding the two hand trigger release plastic hardware.
What Kinderkraft used is the lift and push type plastic hardware which
as of yet has not had any recalls.
If you need details about build your crib, here can find the
Kinderkraft Vermont 710 - User ManualHope helped with this. Good luck.
I need hardware parts for a Kinderkraft Crib,
We carry all replacement hardware for Kinderkraft cribs, including the Vermont 710 model. Please call us at 800.205.9642 or 800.772.1041 for direct assistance. We also can provide the original assembly instructions by email, if you would like a copy to review before you call, please email your request to us at
[email protected]
I need to know how
You can call Products America at 800-205-9642 or 800-772-1041. We offer a wide verity of hardware and instructions for many cribs.
Lost the hardware to reassemble the crib - what do
Products America supplies all replacement hardware for Kinderkraft cribs, including the Vermont model. This model uses moving side hardware as well as a series of fasteners to attach the non- moving side and mattress support to the head and footboard of the crib. We also have the original assembly instructions available with parts list for you to determine exactly which parts may be missing. Please call us at 800.205.9642 or 800.772.1041 from 8am to 6pm Central Time M-F for direct asisstance or email
[email protected] to request the assembly instructions.
Side rail falls off
Sounds like you may either be missing a piece of the moving side hardware, or have an item installed backwards (the moving side components are left and right orientation). We can email a copy of the assembly instructions to you as well as replace any missing or broken hardware that you may need. Please email your request to us at
[email protected], and mention that is for a Kinderkraft Vermont (should be model 710 - check your label for model info), or call us at 800.205.9642 or 800.772.1041 for direct assistance.
Not finding what you are looking for?