20 Most Recent Liesegang dv 560 flex LCD Projector Questions & Answers

LCD are very septable to dust thats why they use filters where most DLP dont. These lamps get so hot that smoke and other things in the air can cook inside the unit.

These things use mirrors and lenses and some use light disipators so smoke can really affect their brightness over time.

DLP units use a spinning wheel and they dont seem to have as much of a problem with dust blobs like LCD but i would guess smoke can still darken their images over time as well.

Liesegang dv 560... | Answered on Jul 16, 2010

Ordered a new lamp at dealers cost ($140). Let's see if it was a malfunctioning bulb.

Liesegang dv 560... | Answered on Oct 09, 2009

I have the same projector and use this brand of bulb "OSRAM" Halogen Display/Optic Lamp: 64655 HLX 250W 24v G6.35 NAED 54254 and are cheap to purchase also the more you buy the cheaper the bulb.

Office Equipment... | Answered 2 days ago

Try again, using words please.

Office Equipment... | Answered 2 days ago

if you cant find a source try looking for a rubber roller recoater online. there are many out there. they strip your old one and recover and machine new rubber to your specs

Office Equipment... | Answered on Jan 20, 2021

If it runs slow, there are a couple of things that cause that. The usual one is that the blades haven't been oiled. The tolerances are very tight between them. You can buy 'shredder oil', or you can use any LIGHT machine oil, 3 in 1 Garage Door Spray is ideal. Spray liberally from the underside

Take the head apart and you will see the electric motor, spray the bearings both ends. All of the cogs should be covered in grease, add some more, or spread around the surplus over the gear teeth.

There should be a fan attached to the motor, make sure it spins and all the blades are on it.

Finally, make sure the vents are free of obstruction.

It is only a light duty, 6 sheet (max) shredder, so should be used for more that 5 or 10 minutes without a long cool down period.



Office Equipment... | Answered on Jan 18, 2021

Try contacting Argus to request it.

Office Equipment... | Answered on Jan 16, 2021

try lexmarks website

Office Equipment... | Answered on Jan 14, 2021

hi dear,
i replaced cartridge of t60 but a problem acquired cyan cartridge not detected but if any cartridge plug out from head cyan is detected.
please find enclosed herewith Problem pics & solve the problem8953a616-9cec-4162-99e9-186b6077460c.jpg655a04ed-9614-4d9b-9032-e6daedf26a9f.jpg

Office Equipment... | Answered on Jan 12, 2021


How to Dismantle a Xerox AX7-19 Monitor

The article regarding the dismantling of a glass fronted Xerox monitor misses one important detail. When placing the back of the monitor on your lap, the bottom edge, BELOW the switches should be slid up in the direction of the top of the monitor. Approx 6mm. DO NOT attempt to prize the glass off the base like I did, trying to follow the previous instructions. To replace, place the the glass on the base, approx 6mm proud of the top edge of the monitor, then slide the glass downward to lock in to the lugs. The two rear screws then simply hold the glass in place, The fixing lugs act like a bayonet fix. Drop in then slide down. I hope this helps with this repair.

on Jan 09, 2021 | Office Equipment & Supplies

Not finding what you are looking for?
Liesegang dv 560 flex LCD Projector Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Liesegang Office Equipment & Supplies Experts


Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Liesegang Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Liesegang Office Equipment & Supplies

  • Liesegang Office Equipment & Supplies

Most Popular Question

professionally clean three year old

  • Office Equipment & Supplies