Acer Aspire 5720-6661 Notebook PC - Answered Questions & Fixed issues

fist of all make sure that the file type of the movie is compatible with your computer's software and that its not corrupted and the download was complete, if you downloaded it from lime wire or a program alike it would be a common problem, try downloading another movie and if the problem persists post it here,

hope i could help at all, help me out give me a thumps up,

blu ray disc are read only for a new dvd blue ray device... buy a blue ray dvd device... that is the solutions to your and too expensive...

If you are using the MS bluetooth stack, you must explicitly prepare your notebook to receive the file. You must have bluetooth icon in the notification area. Right click it and select something like 'Receive file' (sorry for not being more specific, since mine is in Portuguese). Only then, send the file from your mobile.
Hope it works for you.

Just my 2 cents...
Regards, Carlos

Hello, there are drivers listed for Windows 7 32bit. Hope this helps. Source: Windows 7 32 bit Drivers Chat Live Facebook

put your mouse over the item then press down and hold left key then use your finger on the pad and just slide your finger across the pad,then when you get to were you want the item togo then just lift your finger off and let go of the left key.

goto your start menu and write in,, restore it should give you the options that you need,thats the easy way for you todo it.

it is written on the original receipt too..

The Yahoo Chat is defective.

http://en.wikipedia.org/wiki/Multi-booting

Is this when connected to power source or on battery? If it is on battery the battery may need to have its memory refreshed. Turn the 5720 off, remove the battery, hold the on/off button down for 15 seconds and when done put it back together and turn it on. Good Luck

just push it in and it should pop out

Reload software

This can be accomplished a couple of ways. Depending on the model of your computer there may be a pressure sensitive switch under the mouse pad that pressing a little harder will actuate. Another method is there might be 'virtual' mouse buttons on your trackpad. Put one finger in the flower left corner and drag on the pad with another. Finally, there is a setting for a double click drag and drop. Tap the mouse pad twice and on the second tap keep your finger on the pad and move it. Good luck!

You have to first log into your account manually and by going to fingerprint application save you finger print within that application and then it will automatically get associated with you account and then only it will work

If you go to your start menu, look for a programme called 'acer crystal eye webcam' and that will bring up your webcam programme.
It is not in the folder 'Acer crystal eye webcam' though, just 'Crystal eye webcam'.

start \ all programmes \ Crystal Eye Webcam \ Crystal Eye Webcam.

If this proves fruitless, type webcam into the search option at the bottom of your start menu and look for the crystal eye webcam.

If these do not work, then look in your control panel to make sure it is installed. If not, contact company, they have a good customer service standard (from my experience)

aspire netbook to factory defaults Save any files or folders on your Acer Aspire One with flash drives. Drag and drop files onto the icon of your flash drive. Go to "Start" > "Restart" to reboot your netbook. Hold down "Alt" and "F10" when you see the Acer logo on the screen. The recovery menu will load. Hit "Enter" and then "Next" to see your recovery options. Choose "Factory Restore" to set your netbook back to factory settings. Follow the instructions on the screen. Choose your time zone and language when the customization menu appears. Reboot the netbook when you are prompted. Restore your saved files from the flash drive. or Click on the Start menu. Then, select all programs, Acer Empowering Technology and Acer eRecovery Management. If this is the first time you have opened the program it will prompt you to set up a password and create a backup CD. Click the Restore button and select the option that reads "Restore system to factory defaults". Wait for the computer to finish the restore process and reboot. Restoring for the Boot Screen If your computer will not boot up properly, you can attempt to reach the restore option by pressing the Alt button and the F10 button at the same time. When the eRecovery menu appears, choose "restore system to factory defaults". Wait for the recovery process to complete and the computer to restart Hope this helps.

mother board prosser no heating why

try downloading the webcam application. http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3827 Just scroll down til your see it.

Hi,
this problem is due to the improper driver for bluetooth module in your laptop . pls install proper driver and software .your problem will be solved .
thanks

Try installing the latest WEB cam driver.Download the WEB cam and device drivers from the Acer WEB site. Makesure you select the model of your laptop the drivers you that require thatmatches the Windows version that is installed on your laptop. Use this link toget to the Acer support: - http://www.acersupport.com/drivers_download.aspx