20 Most Recent Kenwood KDC-138 FM / AM Receiver Questions & Answers

0helpful
1answer

Kenwood kdc-138 wire color code

Hi,
I'm not familiar with the color code of this model but I have a copy of the service manual which may help you regarding on the pin-out of the harness. Let me know your email add and I will send you the copy.
Regards,
Jdvillanueva
2/19/2021 3:51:16 AM • Kenwood KDC-138... • Answered on Feb 19, 2021
0helpful
2answers

Subwoofer settng

Hold src button for two seconds and they access the menu. Radio has to be in stand by mode
5/6/2016 6:02:46 AM • Kenwood KDC-138... • Answered on May 06, 2016
0helpful
1answer

The screen comes on but there is no sound

check the wires.
5/19/2014 12:16:16 PM • Kenwood KDC-138... • Answered on May 19, 2014
0helpful
1answer

My kenwood kdc 136 works normal for ten minutes then stops and displays ;ocer

I had an issue like this took me months to fix it. I finally just put in a higher grade fuse in. I think it had a 10 and i put in a 15 worked after that but mine was not wired to the battery. I would say check your fuses and wires.
5/19/2014 11:31:43 AM • Kenwood KDC-138... • Answered on May 19, 2014
0answers
0answers
0answers
0helpful
1answer

What is the blue and yellow wire on the wire harness for the kenwood kdc-138?

According to any wiring diagrams I have looked at for the radio in your vehicle (both the premium and base systems), the only wire that I see that could get pretty much anyone confused unless they know is a dimmer wire coming from your headlamp switch. The only reason I cannot be 100 percent sure is because according to the wiring diagrams it is a black and yellow wire but I don't see any other wire with yellow that could cause a question. To be sure you can always check at the connector on the headlamp switch and check for continuity but if I were a betting man I would put my money on this. I went on and gave you the wiring diagram for the base system (without an amp). Not sure how well you can see anything due to a size limit on pictures but I hope I was able to help.12_2_2012_12_51_24_pm.jpg
7/3/2013 7:19:42 AM • Kenwood KDC-138... • Answered on Jul 03, 2013
0helpful
1answer

Reset

The wiring diagram is on page 16 of the manual: http://manual.kenwood.com/files/B64-3898-00_00_KW.pdf
5/12/2013 3:12:49 AM • Kenwood KDC-138... • Answered on May 12, 2013
0helpful
2answers

Subwoofer option on my kenwood kdc 138 receiver

go to kenwood wesite to down load instruction manuals
3/31/2013 11:46:14 AM • Kenwood KDC-138... • Answered on Mar 31, 2013
0helpful
1answer

How do you reset the clock time

Follow the instructions on page 11 of the manual.
10/17/2012 10:37:43 AM • Kenwood KDC-138... • Answered on Oct 17, 2012
0helpful
1answer

How do you reset the time

Follow the instructions on page 11 of the manual.
10/17/2012 2:41:32 AM • Kenwood KDC-138... • Answered on Oct 17, 2012
0answers
0helpful
1answer

Everytime I turn on the truck my kenwood kdc-138 goes into standby mode How can I get it to stop going into it

You need to wire in a constant power use your meter and turn the key off and look for constant 12v power with the key off that is the wire that runs your memory clock,presets etc..
8/27/2012 3:05:38 AM • Kenwood KDC-138... • Answered on Aug 27, 2012
0helpful
1answer

Kdc-715s install diagram

The installation procedure begins on page 41 of the manual.
8/4/2012 5:08:17 AM • Kenwood KDC-138... • Answered on Aug 04, 2012
Not finding what you are looking for?
Kenwood KDC-138 FM / AM Receiver Logo

116 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5047 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8991 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Car Audio & Video

  • Kenwood Car Audio & Video

Most Popular Question

reset

  • Car Audio & Video
Loading...