Top 20 Dane-Elec DaneElec 4GB USB Drive Blue Hard Drive Questions & Answers

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

Files on a flash drive canbe corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon andthen click on the flash drive you want to remove and then remove the flashdrive when the computer message says it is Safe to remove.
To restore the flash drive to working order you need to format the flash drive,BUT you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htmwww.CardRecovery.com

Are you based in the UK? if so SaveMyUSB.com could help you. Good luck

click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or if you can see your usb drive but its not working ports(com&lpt)right click update driver check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also scroll to disk drives if you can see your drive + to expand right click you should see options to update driver,disable,uninstall scan for hardware changes. or select properties you should see options in the general tab to troubleshoot,policies,volumes,driver and details under the driver tab you will have the options to check the driver details,update driver,rollback driver or uninstall hope this helps don

16.99

When a Universal Serial Bus [USB] drive doesn't show up in your computer, it can be an urgent problem, especially when you need to access files or data stored on the drive. It is not easy to troubleshoot this issue, compared to other computer problems, because there are a few probable causes for the problem. On a positive note, USB problems generally require one simple step to resolve.Name Conflicts This problem generally occurs on computers with an exceptional number of attached drives, whether they are networked, or hard-wired. Computers with multi-format card readers can have this issue. USB drives don't always find an available drive name that is compatible with their naming conventions. For example, if the USB drive is named "G:," and your computer has a networked drive "G:," or additional hard or optical drives named "G:," your USB drive will not show up. This problem can be resolved by remapping a drive to a different name; this can either be a temporary name change, or permanent. One thing to keep in mind, is that drive remapping is not something that a computer novice should attempt. Consult a technician for help with remapping/renaming a drive. Software Conflicts With newer computers, it is much more unlikely, but there could be a chance that your USB drivers are not installed. Checking your USB drivers is a simple as right-clicking "My Computer," and selecting "Properties." From the Properties menu, select the "Hardware" tab, and click the "Device Manager" button. A list of your computer's hardware will open, and you will find "Universal Serial Bus" on the list. If you see a red "X" or yellow exclamation point, your drivers are not installed. Drivers vary by computer; if you cannot find the driver disk that came with your computer, you will need to go to the website of your computer's manufacturer to locate and download the driver. If you are not comfortable downloading and installing software, contact a computer technician. Drive Malfunction USB drives are more durable than floppy disks and their predecessors, but they are not indestructible. If your computer does not detect your drive and it has before, test the drive in other computers. If the drive does not show up in several computers, there's a good chance that it has gone bad. Repeated rough handling of a USB drive can damage the memory chip on the drive. Removing the drive without "stopping" it can corrupt the drive, as well. USB Port Malfunction Most USB drives have a small led that will light up when the drive is inserted into the USB port. If the LED does not light, it could indicate a problem with the drive, but there could also be a problem with the computer's USB ports. If the drive does not light up, and is not detected, plug it into another computer. If the drive is detected by the other computer, there is a problem with the original computer's USB ports. Follow the steps in the Software Problems section of this article to check if your USB drivers are installed. If they are, you may need to contact a technician to check your USB port connections. The USB ports on the computer may have been connected when the computer was manufactured or recently serviced. If you are not comfortable working on your computer, contact a technician. Failure to take certain precautions could result in damage to your computer's motherboard. Expert Insight Whether your drive is new or you've had it for a while, do not be over-reliant on its durability. Keep at least one additional copy of your data in another location to avoid catastrophic data loss. USB drives are not indestructible, and it is not always possible to recover data from them, even under favorable circumstances.

As well as any other device, a memory card can suffer from various influences and so it may break down for a number of reasons. In this article, we'll consider possible causes of damage to memory cards and give a couple of hints at recovering their data. https://hetmanrecovery.com/recovery_news/repair-sd-and-restore-data-from-a-damaged-or-not-working-memory-card.htm

Step 1: Click start control panel administration tools computer management device manager scroll through all of your devices If you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver If you computer came with a motherboard disk the drivers could be on it. Rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated.

click start control panel administration tools computer management device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red xright click to reinstall drivers or

if you can see your usb but its not workingports(com&lpt)right click update driver

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem type in run "regedit" then press ok then you can see registry editor then locate below key. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318} And remove upper filter and lower filter. Then restart computer then check. Also locate the below key and make sure it's value is 3 not 4. HKLM\system\currentcontrolset\services\usbstor make sure start value is 3 not 4

if still no luckyou might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap hope this helps

What brand of flash drive is it? Try doing a Google search with the keybords "4Gb flash drive [brand] driver" and you should be able to find a download.

Did the hard drive come in the enclosure? (Is the hard drive supported by the extrenal enclosure) Does it work when plugged into another computer and have you tried using another cable?
Did it come in the enclosure? Try another cable
Did it work when plugged into another computer?
Yes - Windows Drivers
No - Try another enclosure or cable
Did it work with another cable?
Yes - Problem Solved
No - Try another enclosure with the new cable
try whichever of these and see if it helps. please respond here with what happens wether it works or not.
Another option by the way is to check what happens when you take the hard drive out of the enclosure and install it inside the computer as an internal Hard Drive. If that works then it isn't the hard drive atleast. I will away to see what happens.

Keep a backup on your hard drive or a backup. The backup system is a free service supplied by your internet provider. If you use it daily or after every update, there will never be an issue.

EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,

Salut! Je pense que c'est le manuel que tu recherches? https://www.manualslib.com/manual/214305/Behringer-Europower-Pmp1000.html

Five common problems a survey could uncover

LinkedIn · Oliver Moorhouse 2 years ago It's common for damp to be caused by a buildup of condensation and poor ventilation. Condensation damp is the most commonly found type of damp ...

What makes selling your home more difficult than buying? ...

Quora https://www.quora.com > What-makes-selling-your-ho... Dec 29, 2022 - When I have sold houses, I ask the realtor what they think the house will sell for. We price it at that, and we have always had offers higher. 3 answers · 14 votes: I have bought and sold dozens of homes. What "sells" a home: 1. Location 2. Street appeal ... What are the main problems home owners face when ... 5 answers Aug 21, 2018 Why are comprehensive property surveys not done ... 10 answers Oct 7, 2022 Are there any cons to closing on a home without a ... 6 answers Dec 9, 2021 More results from www.quora.com

17 Common Issues Found During A Property Survey

Petty Son and Prestwich https://www.pettyson.co.uk > About > Our Blog Drainage issues can vary from faulty drain pipes to sagging guttering, all of which will be pointed out by your surveyor in their report. Some drainage-related ...

Common Issues Revealed by House Surveys

Really Moving https://www.reallymoving.com > surveyors > guides > pr... What might my house survey find? · Japanese Knotweed · Subsidence · Dry rot · Woodworm · Damp · Asbestos · Electrical issues · Faulty drainpipes.

On the motherboard. Normally a CR2032 button battery. https://www.google.com/search?q=mecer+z140c+xpress+motherboard+battery+replacement ..

Tamper mode means the prepaid meter is in a mode where it does not supply power. Check your meter remote controller (used for recharging units). If it displays a Relay Open symbol, the meter is in tamper mode. To remove tamper mode requires you contact the distributing company and request a tamper reset token. The tamper reset token is a 20-digit code that clears the meter from tamper mode and restores it to its default state.

If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired anemployment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut. They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.

The easiest way is to power it off and back on again using the Restart option in the menu

DICEUS with 13 years experience. SIMFORM for modernizing legacy architecture. ColorWhistle for leads. PixelCrayons for tailoring to your specific needs.