20 Most Recent
Seagate Barracuda 7200.10 ST3160815A - 160GB - 7200rpm - Ultra ATA/100 - IDE/EIDE... 160 GB Hard Drive - Page 5 Questions & Answers
Fix my old seagate external drive
remove the external cover and connect to PC internal drive controller and scan by partition recovery software and fix it.
if contain partitions and drive letter showing on the my computer right click and select properties select scan now with check box in tools tab
1/29/2017 7:16:01 PM •
Seagate...
•
Answered
on Jan 29, 2017
St3250310as hard disk failure is imminent
Believe it, get a new hard drive and copy files to it. You can use a drive copy program such as Reflect, they allow downloading a demo version that works.
1/7/2017 11:31:56 PM •
Seagate...
•
Answered
on Jan 07, 2017
Get full full capacity of external 2 tera Seagate that now is reaing only 110 gig
This has happened to me before, also. What I had done was copy a disc IMAGE from the old, smaller drive to the larger drive - and the larger one turned into the same size! You did not mention your operating system (Windows, Mac, etc) but my solution was in Windows to go to Disk Management function and view the unallocated space left. Sure enough, there was "unclaimed/unused" space for the entire difference in size. Following the instructions of the Disk Management tool, I just added the remaining space to what was C: drive. I could have just as easily created a different drive space with the leftover, it's up to you - but I find it preferable to have my space in one chunk.
Note: This is a very sensitive area of Windows when you're dealing with file systems. A raw beginner might want to have an experienced friend help them through it, but if you follow instructions EXACTLY even a first-timer should be able to do it. If this solution does not work, let us know. Best wishes - Mark
https://www.lifewire.com/how-to-open-disk-management-2626080
How To Open Disk Management
11/28/2016 3:48:49 PM •
Seagate...
•
Answered
on Nov 28, 2016
Refer Acer m3970
Can not Install windows 7 of new hard drive
Factory back-up discs and recovery discs are intended to repair defective installations or to kick-start an installation that refuses to start so it is unsurprising they will only go so far.
Your system disc might be defective. This is a problem I have had with XP in the past. It is possible your CD/DVD drive has a dusty lens and is unable to read the disc properly or perhaps the new hard drive has a problem.
I suggest you instal the new hard drive as a slave in another computer and format it and run the chkdsk utility. If all is well reinstal in your computer.
Take a close look at your system disc checking for flaws and perhaps put a lens cleaning disc in your CD/DVD reader before trying again.
10/28/2016 12:10:44 AM •
Seagate...
•
Answered
on Oct 28, 2016
After I format my hardisk for several times and
Install the drive on a working computer and access through disc management. that will allow you to initialize the drive and format it ntfs. Goto my computer right click select manage select drive management. This works on XP if you have other OS than search for disc management for your OS.
7/18/2016 9:07:27 AM •
Seagate...
•
Answered
on Jul 18, 2016
Not finding what you are looking for?