Frigidaire Gallery GLEFM397DS Electric Kitchen Range - Page 3 - Answered Questions & Fixed issues


The problem is the oven temperature sensor, this is located inside the oven near the top. For diagrams and illustrations of your specific model go to www.appliancehelponline.com and enter your model #

Oven temperature sensor is open (above 3000 ohms)
Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor and control

Frigidaire... | Answered on Apr 09, 2010 | 262 views


Hi,
Before you run that self cleaning feature, check out this tip that I wrote...
http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

Asker's Testimonial " Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! " - amymrocks

Frigidaire... | Answered on Apr 09, 2010 | 358 views


If the unit has a board, there should be a fuse to protect it. Look for that. If you find it, and it is blown, BE SURE TO REPLACE IT WITH THE EXACT SAME FUSE/

Frigidaire... | Answered on Mar 31, 2010 | 187 views


Hi,
The ignitor is not working it has gone bad... replace the ignitor..

Check out this tip that I wrote..

http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

Heatman101

Frigidaire... | Answered on Mar 05, 2010 | 215 views


Hi There
I have the coed for it. But If it's less then a year old you can have it fix for free.Just let you know and here's the coed for you to read.
F1 Circuit board defective Replace control board Thank you for writing to fix ya.
Best Regards Richard

Frigidaire... | Answered on Jan 07, 2010 | 116 views


Hi, If I was being called out to look at your range and you described to me what you said in your post, I would definetly bring an element. I suugest you tell that to your service person or purchase a new element. That is quite often the way the element's burn out, just as you described...a sparkler. Hope that help's. Good luck and thank's for visiting fixya. Macmarkus :)

Frigidaire... | Answered on Dec 11, 2009 | 366 views


YOUR PROB GOING TO NEED TECH LOOK AT THIS ONE ITS NOT A EASY FIX MUST CHECK SEVERAL ISSUES SORRY

Frigidaire... | Answered on Nov 06, 2009 | 123 views


My stove did the same thing after I cleaned it. I had to have the sensor replaced. That is what the F1 code is.

John

Frigidaire... | Answered on Oct 01, 2009 | 730 views


the previous owner was on lp gas, you are on natural gas. the orfice ratings are different. call a professional to convert the range back to natural gas.

Frigidaire... | Answered on Sep 29, 2009 | 623 views


Suspect a bad oven element. Worse case is a bad oven relay on the clock control board.

Frigidaire... | Answered on Sep 20, 2009 | 1,674 views


Approximately $200.00. Plus tax and shipping.

Frigidaire... | Answered on Sep 12, 2009 | 374 views


I run into this sometimes. Try this. Look at the timer on the panel. Cancle any time bake or clean comand thats set. When you do this, you should be able to unlock the door.
Please rate this solution

Frigidaire... | Answered on Aug 27, 2009 | 241 views


The top element normally operates only when you turn the temperature control all the up to the broil setting as it is the broiling element. If it doesn't work at the broil setting, suspect a bad brioler element or a faulty temperature control.

Frigidaire... | Answered on Aug 12, 2009 | 681 views


Check to see if the oven elements work, take out the racks and check if the black tubes on the top and bottom have ripped.

Frigidaire... | Answered on Aug 07, 2009 | 488 views


With the oven OFF, check the resistance of the bake element with a ohmmeter on the lowest scale. Rx1. If your reading is infinate, replace the element as most elements will open circuit when they burn out. They don't short out.

Frigidaire... | Answered on Jul 30, 2009 | 977 views


its the problem of over temprature sensor.its got shorted or got loose.so the machine is showing F3 error code on its display.check the sensor with continuity by refitting it. -------------- for how the sensor looks in shape click the link directly http://www.applianceaid.com/images/my-own-faultcodes.JPG you can get new sensor at www.repairclinic.com thanks.

Frigidaire... | Answered on Jul 13, 2009 | 339 views


Hold the light switch closed on the oven and then push and hold cancel button after the oven cools.

Frigidaire... | Answered on Mar 09, 2011 | 394 views


get it cleaned

Frigidaire... | Answered on Jun 30, 2009 | 173 views


F90-Maximum oven door unlock time exceeded.
1. (F90, 91, 92, 93 & 94) Check the wiring between EOC & Lock Motor Micro Switch. 2. (F90, 91, 92, 93 & 94) Replace the Motor Door Latch assembly if necessary. 3. (F90, 91, 92, 93 & 94) Check for binding of the Latch Cam, Lock Motor Rod & Lock Motor Cam. 4. (F90, 91, 92, 93 & 94) Check to see if Lock Motor Coil is open. If open, repl;ace Lock Motor Assembly. 5. (F90, 91, 92, 93 & 94) Lock Motor continuosly runs - if Micro Switch is open, replace Lock Motor Assembly. 6. (F92, 93 & 94) Check oven door Light Switch - if open, replace Switch. 7. If all situations above do not solve probem, replace EOC.



Frigidaire... | Answered on Jun 17, 2009 | 1,618 views


Unplug the unit or flip the breaker switch (easier). After about 30 seconds, the latch will retract, allowing the door to close. Re-start the self-cleaning process.

Frigidaire... | Answered on Apr 21, 2009 | 274 views

Not finding what you are looking for?
Frigidaire Gallery GLEFM397DS Electric Kitchen Range Logo

137 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3518 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...