Top 20
Tomtom One XL GPS Receiver - Page 4 Questions & Answers
My one xl does not
If your navigation device does not get a GPS fix or drops the signal while inside your car, but it does get a fix outside your car, your car may have an athermic or heat reflective windscreen. This type of windscreen interferes with the reception of the GPS signal.
You could consider using a third party re-radiating antenna.
Keeps going to no maps
Hi,
For this problem first reset the GPS device.
Check the battery also.
If it doesn't help then you have to reload the software of the device. Then upload the maps again.
You may need a firmware update for the device.
We have no user manual in english, where can we
You could try
operatingguides.com
if you need a user manual
or
servicemanuals.co.uk
if you want the schematics etc
We've used them in the past and found them very good.
Also if it is not listed then ask via the link
How to find the place
Select "Navigate To". Then select the "Arrow" for the next page.. Then select "Latitude Longitude". Then enter the Latitude info and press "OK". Then enter the Longitude info and press "OK". Hope this helps you. If it does please vote!!
I tried to update my
you should download a new one, for your region, to change it and put in the navigator. and, for the future, every time before you make some changes, save all the content in one folder on your pc.
Satnav fell of the window mounting and won't
Try the factory reset option, If you looke around where the docking connector is on the bottom you should see a tiny hole that you will be able to push a pin into. This will activate the hard reset option and hopefully will bring your TomTom back to life.
Many thanks for using FixYa
Tom tom xl2 wont let
you will need an updated post code file that allows 7 digit post codes (if your in the uk)
http://www.tomtom.com/updates/great_britainpostal_all.zip
Just download that file then extract the files ,plug in your tomtom to your pc, open up the tomtom device in my computer(XP) or computer(Vista/Windows 7) and copy the extracted files into the zip folder, then unplug the device and you will be able to enter full postcodes
I don't have signal
hello there firstly there are two solutions for this problem ,reset the receiver ,and calibrate it ,get an external antenna this might just fix the problem goodluck
Unit is one year old. Worked fine this morning,
try this originally posted by gt3rs i just did it and it worked for me
Here is a solution that worked in my case (constant reboots after voice select)
- Plug your tomtom into your PC.
- Run TomTom Home
- Select the option to run your TomTom through your PC (TT Home)
- You should be greated with the select language screen
- Then simply select language etc.
- When you get to the voice selection: select a voice (here TTHome should freeze) <- also strangely enough notice the cancel button doesn't on the screen (as it does when doing this on the device)
- Don't panic TT Home should start working again in a few seconds
- Disconnect your TomTom and that should have solved the problem, the normal map screen should show up upon starting up your TomTom
This solved the issue for me, hope it does for you good luck!
Not finding what you are looking for?
