Make sure there is power present at the socket.
If not then the wire must have bad connector some where between the socket to the switch or may be the switch itself is defect.
If yes, there is power at the socket then make sure the center touch the end of the bulb.
Good luck
Mai
the method when converting gasses is to use different jet sizes required for the new gas in use
it also means that the air shrouds have to be adjusted to maintain the correct burn ratio and get a blue or colorless flame and a possible adjustment or the pressure regulator
Gas is NOT in the domain of the DIY and only a qualified accredited gas fitter should be doing the job
Hey friend, I appreciate your post! It sounds like a possible issue within your control panel or a faulty wiring harness. I would recommend seeking assistance from a professional for further proper diagnosis and repair to avoid any unnecessary part purchases. If you need any additional assistance please feel free to reconnect. -Matt
You claim it isn't a temperature sensor, perhaps because there is a working temperature display? I don't know because I am not familiar with your appliance.
From your description I expect it is the thermostat thermocouple that is broken and the bare copper wire is actually a capillary tube. Normally a sealed assembly with the thermostat, when broken the thermostat doesn't shut down the oven.
Hello, John -
The information here may prove instructive:
https://homesteady.com/how-7979236-replace-glass-stove-top-frigidaire.html
You can also add the model number of your Frigidaire range by choosing "Comment" and providing the model number so that I or another Fixya.com answerer can provide you with the user manual for your model of glass top range.
Best wishes.
If your microwave oven stops working then you should get a professional. It could be that the power is cut off by something like a fuse failure. DO NOT tinker with your microwave oven because they can give you VERY NASTY SHOCK. IT WILL MOST DEFINITELY Electricute you. SOLVED My microwave is not heating but the timer is working Microwave