20 Most Recent Frigidaire FEF336BC Electric Kitchen Range Questions & Answers

0helpful
3answers

Stove won't heat

Oven was working, I had it on pre-heat, then I turned on the stove top, but the burners won't heat. When I turn on the stove top the stove makes a short BUZZ noise and the clock area lights up, when the burner is turned off all the lights go out. Please help, food prepared.
Thank You
2/15/2022 9:20:17 PM • Frigidaire... • Answered on Feb 15, 2022
0helpful
5answers

Frigidaire Smooth Top Range/Oven stopped working

for all others with this problem: I had the stove serviced. Repairman reported a loose wire to the elemets (tightened and did not fix the problem) followed by a stuck relay, and after some banging on the back of the control panel, the elements now work fine. He said if it happened again the only solution would be to replace the relay/control panel, a part of about $160, but I'll get credit for the price of the service call already paid. Compare to the price of the stove, I'll accept the $125 for the service call.

so tapping on the back of the control panel is worth a try if your stove is pulling this trick.

11/7/2021 10:26:20 PM • Frigidaire... • Answered on Nov 07, 2021
0answers
0answers
0answers
0helpful
1answer

Range unit stands too far away from wall

There are mounting plates that recess the plug in the wall. Hardware stores have them in the electrical parts department.
4/15/2017 5:24:24 AM • Frigidaire... • Answered on Apr 15, 2017
0helpful
2answers

Frigidaire electric range smooth top with no oven function

although you dont have hte model number , that is indeed a correct and valid part number for the control lists for a about $120. since your back there give a quick look at the wiring into the unit, is that ok ??? adn where the burnout is on the control does it appear to have shorted out against the back wall??? perhaps a relay on the board just blew??? i really wouldn't thinkn tha another component was goning to make that go bad, also ck the bake and broil elements for continuity, perhapa wire fell off the element blowing out the control
1/4/2017 11:18:34 AM • Frigidaire... • Answered on Jan 04, 2017
0helpful
1answer

Binking light on one control of electric blanket (Sunbeam)

I'm not sure how I was registered as having a problem with an electric range; my problem was with my Sunbeam electric mattress pad.

I used one of the suggestions I read here. I unplugged the connection to the mattress pad and blew into the receptacle to clear any dust or lint from it. I reconnected everything, plugged it in, and the problem has been eliminated.

Thanks for the suggestion.
11/11/2015 5:48:34 PM • Frigidaire... • Answered on Nov 11, 2015
0helpful
1answer

Why doesn't my stove top and oven heat up

Check your circuit breakers in the power panel for a bad breaker. The breaker has a pin connecting both handles One breaker can trip without tripping the other. This condition will only allow 115 volts to operate the controls and light bulbs but will not power the heating elements.
7/15/2015 5:18:09 PM • Frigidaire... • Answered on Jul 15, 2015
0helpful
1answer

Is their a reset button on a frigidaire elctric range model ES300

clock, timer, temp gauges for oven shorted out, is there a reset button?
2/22/2015 12:56:22 AM • Frigidaire... • Answered on Feb 22, 2015
0helpful
2answers

I got the Oven door unlocked but...

Not sure what f-15 is either?  Look on the back of the stove and see if there is a tech sheet.  This will tell you the codes.  My guess would be the lock motor has gone bad.  You can check the motor by removing the wires from its terminals and check for resistance with an ohm meter.  Make sure to unplug stove first!  Was this after running a clean cycle?  Let me know what you find.
10/14/2014 12:38:37 PM • Frigidaire... • Answered on Oct 14, 2014
0helpful
1answer

Why has my frigidaire CFEF372BC2 oven stopped working? There was a loud popping sound and now oven doesn't work but stovetop and clock are fine

Hi Friend, this is Z. Thank you for your inquiry! Based on the symptoms you are describing, you may either have a communication error from the main control board or a potential wiring failure. You may try and reset your range by disconnecting the to your range for up to ten minutes by flipping the circuit breaker off and back on. If the issue proceeds, then it really could be a hit or miss calculation in parts so I would personally reach out to an experienced tech that will be able to identify the precise reason.
7/18/2014 6:33:58 PM • Frigidaire... • Answered on Jul 18, 2014
0helpful
1answer

Right front burner wont get hot. Light goes on but it remains cold, Whats up with that?

Good Afternoon Paige, thank you for your post! Based on what you have described, it sounds like you either have a wiring failure or your burner is faulty. In this regard, it is best to contact a professional to proceed further. Best regard! - Z
7/18/2014 6:23:34 PM • Frigidaire... • Answered on Jul 18, 2014
Not finding what you are looking for?
Frigidaire FEF336BC Electric Kitchen Range Logo

510 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

188 Answers

Paul Carew

Level 3 Expert

3725 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Kitchen Ranges

  • Frigidaire Kitchen Ranges

Most Popular Question

frigidaire cfef372bc2 oven stopped

  • Kitchen Ranges
Loading...