20 Most Recent
Sanyo Xacti VPC-HD1000 Flash Media Camcorder Questions & Answers
Sanyo Xacti VPC-HD1- doesn't do anything in record mode
As I have been writing on other HD1/2 problems, sometimes it can be the card which is an issue. If the card is too slow or perhaps corrupted then the device can find it difficult to record.
This and other soft faults (that are reperable by turning the power on and off, changing or reinserting the card, removing the battery) are often indicated by a flashing red recording light.
Settings not saved
It is by design. I guess Sanyo cut corners in some places and all of the Xacti cameras AFAIK have that problem, they DO NOT save custom settings. so you have to redo your settings every time to turn it on
Can't get started
Could it be that the SD card is not fast enough? I think that SD 40x or SDHC class 6 is needed from my experience (I am not sure what it says in the manual). What speed/class is the card you are using? I get these sort of problems intermittently on my HD2 (the predcessor to the HD1000) when I use a slower card.
Problem with memory card
What model Sanyo camera? What type and size memory card? Just what problem are you encountering? Is there an error message?
Sanyo VM-D66P error: CASSETTE
There is a pulley that breaks inside but as these have been obsolete for over 20 years, I doubt it is repairable any more.
Fully working VM-D66p for £30 on amazon or fleabay.
Not finding what you are looking for?
