20 Most Recent
Philips Magic5 Voice DECT Duo - Fax / copier - thermal transfer - 50 sheets - 14.4 Kbps Plain Paper - Page 9 Questions & Answers
Is it possible to do
No, since there are no factory settings - the only thing that changes is the amount of memory used by the recordings. To delete them all press Menu, select Setup, select Delete dictations, press OK. For a hardware restart just remove the batteries for half an hour.
If the unit is unresponsive even after that then the controller is defective and that can't be fixed - the recorder is dead.
Hello~. I bought a mfd
if you install any other version apart from the one you have, it might work but have a reduced functionality
Hi. I have a
Hmm it sounds like a memory issue inside the actual printer. You say you have tried turning off and on, but have you tried fully unplugging the unit from the wall for a good 2 minutes, hit a few buttons to make sure power is drained from the capacitors, and then plugging back in. Does it still show "print stored document?" Please let me know and I can help further.
Thanks
Tim
I need crystal 665 printer
drivers and owners operating manual are almost always free for download
from manufacturer's website. look for support or help sections. install
drivers and software first, then connect device.
Can I get software to buy for my printer I bought
Here's the link
(click here). Open the link and you'll see the "Driver V2.4", click it and and save or run it. Seems you've made a small mistake with the model, if I am right, it should be Philips MF Jet 440 PT.
If you need my further help, let me know.
Good luck.
Thanks for using
FixYa.
Someone is sending us 1600 sheets how do we cancel
It is not normal for someone to send 1600 sheets via Fax.
Unplug the fax/phone line from the fax machine...verify that your fax is ok by just making a copy on it without the line plugged in...then report the problem to your local phone company.
Keeps sending the same fax
Its either that the memory on the motherboard went bad and needs replacement or that you need to clear the buffer of the ram in order to make this fax stop resending the same info.
Consult your manual to clear the memmory's buffer and write me back with the results if that fails :)
Philips crystal 660 windows7
Unfortunately your fax is not supporting windows 7 or vista
But you can try download xp drivers
http://support.sagem-communications.com/site/modele_fax.php?page=driver&prd=PhilipsCrystal660&pays=uk
in some cases they worked on 7
or you can try with these program
http://www.driver-soft.com/
How do i program my
Introduction
A Retractable PC Controller for use with personal computers. Retractable connection cable, keyboard/mouse emulation software (Profiler), and rubberized tactile grips provide maximum
control and portability. The Retractable PC Controller is equipped with two built-in motors, which have unbalanced weights to provide vibration feedback in games that support this feature. (The Keyboard/Mouse emulation profile editor software and Dual Vibration feedback are not supported on MAC computers).
CAUTION: Connection cable length should be adjusted before starting your PC or MAC game. Extending or retracting cable during game play could cause the game to malfunction or crash. It could also cause a loaded profile to be dropped.
Do NOT pull on the connection cable as this can damage the Retractable PC Controller. The connection cable should be gradually extended until the desired length is reached.
System Requirements
• IBM compatible personal computer with a Pentium 350 or higher processor
• Microsoft Windows Vista 32 BIT (x86) 98SE,ME, 2000 or XP operating system
• 32 MB of RAM or higher
• 35 MB of available HDD space
• Double-speed CD-ROM drive or higher
• Super VGA monitor with display card supporting High Color
• USB port
Product Features
A) Two (2) analog control sticks-Left / Right
B) Four (4) digital fire buttons (1,2,3,4)
C) Four shoulder triggers (5,6,7,8)
D) Start & Select Button (9, 10)
E) Analog Button
F) Analog LED Indicator
G) Built-in dual vibration (PC only)
H) 8-way directional control pad.
I) Mouse button
J) Esc button
K) Enter button
Introduction
for more details click on this link directly
http://www.p4c.philips.com/files/s/sgc2909_27/sgc2909_27_dfu_aen.pdf
-----
This will
help. Thanks please keep
updated.please do rate the solution positively .thank you for using fixya
Not finding what you are looking for?