Samsung Yepp YP-P2 Digital Media Player - Page 2 - Answered Questions & Fixed issues

Check if the cable is connected properly. If it is connected properly then check if the cable is working by connecting the device on a diffrent pc ? As soon as you connect you device to the new pc the system will inform that a new hardware is found, that means that the cable and you device are working fine so there is a problem with the computer. Either it is blocked by the firewall or the drivers are corrupted, if it is corrupted then reinstall the sync and things should work smoothly. Make sure you create a backup and restore points before you reinstall the sync

Connect it to your PC and then try to charge it for 5-6 hours as it is the average charging time for mp3/4 player it will help alot.!
Thanks :) Please rate.

Deleting Files,Pictures,Videos,Audio
Books, etc. from MP3 Player

Hook up your mp3 player to your computer
Go to your desktop and double left click on "My Computer"
When it opens you will see listing that says "Devices with Removal
Storage" your mp3 player should be listed there.
Right click on your mp3 player, and a window will open, right click on
"Open" and now your files/songs should be visible.
Hold the left click down and drag it across all the files/songs that
you do not want this will highlight the files/songs you do not want,
release, right click and then click on "Delete"
Now your mp3 player should be clear of the files/songs you do not want.
Be careful and do not delete files needed to operate your MP3 player.
Good Luck,
I hope this helps
Please rate me,
Thank You

you dont give me enough information

Take it to get da head phone jack fixed.

This is the download center for Samsung, you will find what you need here. Good Luck, I hope this helps. Please rate me, Thank you

http://www.samsung.com/ca/support/download/supportDownMain.do

It is most likely the headphone jack.

go to the p2 website and it should tell u

this problem is due to usb driver not properly installed. do one thing plug that device in another pc and watch whether it is recognised or not. if it recognised then u will have to install usb driver from ur motherboard cd and if not that then u need driver for that device to work properly in ur pc and u get that driver in the device manufacturer cd or website. for this search go to www.google.com.

hi there, a fimware update may solve the problem,

you can find the installer here:
http://www.samsung.com/us/support/download/supportDownloadMain.do

to proceed, follow the instructions given in this video:
http://www.youtube.com/watch?v=QCuJ4hAfiYU

if you should not like his accent, just look up another on youtube...


good luck

try reseting your device by pressing the small hole on the back of the device that has the small letters RES under it.

when i got my yp-q1 i had games on it but the next daii th games had gone how do i get the games back?

if there isn't screws to take the MP3 player apart then their are clips on the inside
Unscrew the screws (or if you have clips from the on/off switch use a screw driver to open it. this isn't the most safest way to open it i could break so this is a last opption.)
ussing a sodering iron resoder the conection between the loose headphone jack and the curcit board.

(you can pick up a sodering iron at Radio shack for as low as 10$)

if you erased them via pc, you might be lucky,
get pandora recory, install and run a check treating the player like a harddisk -tis could work

Try resetting it by using a sharp object, like a pin and press the reset button with pin ect.

Hold down the reset hole at the back of the player until the player shuts off.
It should work fine once turned back on.

Hope this helps!

The video must be a MPG (MPEG), AIV, WMV, ASF, SVI, MP3, RM (RMVB), MOV or SMF type of video. If it is not, try and find or download a video converter. Also remember on Samsung Media Studio click menu, enviorment settings, general configuration, my PC and make sure that you have checked in all the checkboxes of video file types.

try taking apart and spraying 'electrical' spray inside.
(can get 'elec' spray from Tandys/Dicksmiths or any electrical shop.)

Try to reset it plug it in your computer time you do. then update your firmware. to the most recent(v5.10)

Make sure your bluttoth has a reset button i suggest also reseting the p2. Also just in case try to redo your bluetooth. If all fails check your headphones for short circuiting.