20 Most Recent SanDisk Sansa Clip MP3 Player - Page 8 Questions & Answers

Slide the power button on your SanDisk Sansa MP3 player up.

2 Hold the power button on your Sansa in the up position for about 15 seconds. This action serves as a powering down of the Sansa device.

3 Wait for your Sansa MP3 player to restart and let go of the power button. Actions taken during your last operation since powering down normally have been deleted and your player is now reset.

HAI........ I HAVE ALSO THE SAME PBM

1. Press Menu button to return to the Main Menu.2. Move to Settings and select it.3. Select Language.4. Select a desired language.

After pressing Menu/Play several times until you see an "Equalizer" logo, choose it and then scroll down. Choose the one JUST ABOVE the selection with "FM". You are in Language now. Just scroll until you see EnglishPlease rely on this thread. If you create a new thread again, there is a big chance I won't see your message.

You may download the Clip manual here.You may download the Clip+ manual here.

You may download the manual here.

my sansa sandisk clip was unabled to rec by my pc

Format your player and it'll erase all the files that it's reading. I had the same issue and when I formatted it again it erased whatever it was reading.

Just Connect it to your Computer using the USB Provided.Once your Done with it, Go to My Computer, Select your Music Player there, Go to Music or Sound File Folder, Just Click on the Song You want to Delete and Delete it....Good Luck!!!!!

Hi,here is the solution for you.Good luck! gylacz

Try leaving it in a DRY bowl of rice for at least 24 hours. This will help to pull any remaining moisture from the unit. After doing this attempt to power it on without power behind it. If the clip does not turn right on, plug it back in to charge for a while. If this does not resolve your issue, you most likely have a hardware issue and will need to either get the clip serviced or replaced. Good Luck :) Let me know how it turns out

You may want to give more information about what you need. Is it possibly a directional data coupler? Are you referring to a part number inside a Sansa player, or something else?Here's a link to a spec sheet for data couplers including the CA711. It has nothing to do with Sansa players...http://www.datasheetarchive.com/CA-711-datasheet.html

Hi,here is the solution for you.Thanks, gylacz

Hi,there is a manual for you here.Thanks.gylacz

Have you tried charging it? Maybe the battery is dead. Have you dropped it? Has it gotten wet recently?

THE LINK Download the sansa updater and you will get the manual and Media CONVERTER and any new firmware updates+ Recovery Mode: download the update software and install then lock your sansa hold in the rec key on the left at the same time push the menu/power button this will take you to recovery mode then connect to the computer Start the update software if it doesn't start automatic go to /start /all programs /Sandisk/sansa updater/ sansa updater and start it up manually... follow instructions on the updater and the sansa