20 Most Recent Sony NW-E003F MP3 Player - Page 3 Questions & Answers

Hi there, Try to refresh the system, also try to use a different port. If it wont work try to reset the MP3 player but please be reminded that doing this will delete all the files on your MP3 player.
Good luck!

when i play it shows no daya

PUT IT ON YOUR PC WHEN DETECTED FORMAT IT AND CHANGE ITS NAME OF WHATEVER YOU WANT ..

IF THAT SOLUTION DONT WORK YOU CAN TRY TO DOWNLOAD A FREE SOFTWARE FOR FIXING THE CURROPTED DRIVE

MP3 players can only play music files in mp3 file format. You need to convert your CDs to mp3 music files onto yourcomputer or download them from the Internet and then copy them to your MP3player.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.
Click on this link for instruction on converting music files to mp3 file format:-
http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

How do I Put Music on an NW-E003F Sony MP3 Player?

The Sony Walkman E003F is a small portable device resembling a flash drive. This Walkman has 1 GB of storage which accommodates about 685 songs. When the battery is at capacity, the Walkman can play back up to 28 hours of audio. The small player has a built-in USB connector to make downloading convenient. If you want to add songs to your MP3 player, you must use Windows Explorer to download MP3-, AAC- and WMA-formatted audio to the device.

Instructions



Remove the USB cap on the player to reveal the USB plug.


Insert the USB plug on the player into the computer's USB port.


Select "My Computer" from the desktop "Start" menu.


Double-click on the "WALKMAN" drive folder to open it.


Double-click to open the "MUSIC" folder.


Drag the audio file from the save location on the computer and drop it in the "MUSIC" folder. The songs will load and play in the order that they are dropped into the folder.

Hope it helped.

Hi,

Follow these troubleshooting steps to resolve this issue.

The NO DATA or FORMAT ERROR message may occur if the portable player has been formatted using the format utility in Windows Explorer. To correct this issue, initialize (format) the portable player using the Initialize or Format utility built into your Walkman player.

Reset the unit by pressing the RESET button with a small object such as a paper clip.

If the issue persists, I suggest that you un-install and reinstall the latest version of the Sonic Stage Software and transfer the songs again to resolve the issue. Click here to download the latest version of the SonicStage Software.

This should resolve the issue.

Thanks for contacting FixYa.

i had the same problem...go onto the sony website, search for ur model and select the Firmware Upgrade. if this doesn't work then download the manual where in the Troubleshooting section it gives you numerous methods for fixing the Format Error...Hope it works...

Thanks for using fixya...

my computer can not know my walkman cause mtp device,

all you have to do is download sonicstage. it wont harm your computer, it was made by sony for their mp3's kind of like itunes.

Hi, please download it here :
www.opendrivers.com/.../cameras-and-mp3-player-sony-free-driver-download.html
www.driverskit.com/MP3/Sony.html

check the battery if it is fully charge or change the battery buy new one if the older one already defective

1st - You need to convert your CDs to MP3 musicfiles.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.
There are also Freeware CD RIP programs on the Internet that can create musictitle and album folders automatically.
OR
Download MP3 music files from the Internet to your computer, some sites willcost money to download these music files.
2nd - connect your MP3 player to your computer using the supplied USB cable.The computer will see this player as an external storage device, Just copy theMP3 music files from the computer's hard disk to the MP3 player.

To do that it most likely would be best to simply factory re-set it again, and return it to "Straight-from-factory" specs. That should be in the documentation that came with it.
use the software that came with the device, or if it shows up in MY Computer as a HDD, then use windows to do it...you can then do as you wish, simply Choose DELETE Click on a file, hold shift key down, keep selecting, they will turn blue, as selected, then Click OK, and they will be gone forever.

http://www.usersmanualguide.com/sony/mp3_walkman
Above you can download a user manual.

http://esupport.sony.com/US/perl/model-home.pl?mdl=NWE003F&LOC=3

To convert music files to mp3 format and copy them to your MP3 player, please click on this link and follow my instructions :-
http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

If you go to http://en.wikipedia.org/wiki/SonicStage#Alternatives there are a few unofficial alternatives to using sonicstage. I have yet to try them but will be doing so soon. Sonicstage just seems extremely slow anyways.