20 Most Recent Zio Corporation Dazzle Digital Video Creator 80 (DM-5400) Video Capture - Page 2 Questions & Answers

0helpful
2answers

Hi, I need to get the firmware for my sharo aquus tv LC-40fg5242e. Cannot find it anywhere..

Hello, you can download the LC-40FG5342E. My LC-40fg5242e was stuck into logo screen and i flashed with the LC-40FG5342E firmware and it´s working now.You can download from sharp web https://sharpconsumer.eu/es/product/g534...or download from my serverhttps://kokeween.mooo.com/index.php/s/nJ...Unzip and copy the 3 archives into a pendrive with FAT32 format.Conect the pendrive into tv and power on, it automatic flash the firmware.Edit:New link for the firmware.https://drive.google.com/file/d/1S_IKzCchw1AHbjUoGHtgq6n2GO_fwOQJ/view?usp=sharing(The firmware link is no longer available on the shap web)For some reason sometimes Fixya link only works if you click on the right button of the mouse and click in "open in a new tab".
7/27/2021 5:59:20 PM • Televison &... • Answered Yesterday
0helpful
10answers

TCL Blue Screen "No Media"

I HAVE FOUND THE ANSWER!!!! I just bought an TCL TV last night and was given the wrong remote. Screen was stuck on "no media" screen BUT I noticed that when I turn the tv on and keep pressing the menu button, the menu screen would pop up for a half second before the no media screen popped up again. So I knew it was able to access it. SO, it took a few try's and with no exact method I turned the tv on, waited til I saw the TCL logo and then simultaneously pressed the menu and channel up button repeatedly. It will open the menu for you and allow you to move between the input channels!!!! It WILL take a few tries to catch it but it worked!!! Your welcome!!!!
7/27/2021 4:47:36 PM • Televison &... • Answered Yesterday
0helpful
1answer

Philips TV. How can I reset to factory defaults?

Philips have a special procedure to enter its service mode, to do a factory reset. If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault . Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in Webview with mobile or by desktop. Mobile View has no search box.
7/27/2021 1:51:52 PM • Televison &... • Answered Yesterday
0helpful
1answer

My blackpoint tv does not display anything when turned on it has a black screen

You can hear the sound of the show, means the TV's main board have no problem. The problem should be with its backlight inverter board. Just check it. Take a torch light, and light it on the screen, and see whether there is any picture on the background. You will see that, if the main board is OK. If so, concentrate on the backlight inverter board. It is common fault with most of the LCD TVs, irrespective of its brand. OK? If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault . Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in Webview with mobile or by desktop. Mobile View has no search box.
7/27/2021 1:49:40 PM • Televison &... • Answered Yesterday
0helpful
1answer

65" LG LED TV. Why did operation become intermittent after several hours watching?

It could just be the fact that your TV has quit working and that you will just have to buy another TV.
7/27/2021 6:48:07 AM • Televison &... • Answered Yesterday
0helpful
1answer

For Panasonic Viera HDTV Model TC32LX60 what is code for universal remote

Nobody buys universal remotes any more. You buy an exact copy of the original. No programming, batteries in and off you go. https://www.google.com/search?q=panasonic+viera+hdtv+replacement+remote+control But if you really want to go back to the 1980s Working Remote Control Codes For Panasonic TVs Panasonic HDTV Codes :1140,1169,1170,1194,1233,1234,1331,1336,1410,1417,1442 ..
7/27/2021 4:44:15 AM • Televison &... • Answered 2 days ago
0helpful
6answers

My Sharp Remote Control Is Suddenly Stop Working

Ok I just dealt with the Sharp customer support for this problem.

1) You need to unplug the TV for 1 full minute and remove the batteries from your remote aswell (this will reset the system)
2) Hold the power button on the remote for 30 seconds with the batteries still out of the remote and the TV still unplugged
3) After the 30 seconds replace batteries then press every button on the remote beginning with the power button in order from left to right and top to bottom (same way you read)
4) Then plug your tv back in and try the remote again.... and the remote and TV should be back in sync.
7/27/2021 4:29:32 AM • Televison &... • Answered 2 days ago
0helpful
2answers

Kdl-32ex520 7 time blinking

seven times blinkings means need to change or replace main board .
7/26/2021 6:33:14 PM • Televison &... • Answered 2 days ago
0helpful
1answer

Como puedo programar un control remoto janesong JS-6212A para un tv LG flatron

Buenas tardes, como programo un control Janesong JS-6226A para un shard, gracias
7/26/2021 5:10:14 PM • Televison &... • Answered 2 days ago
0helpful
2answers

Original Sinotec remote not working- changed

No codes needed , remove the batteries then from the top, first button , work your way down and hold each button in for 3 seconds , if a button has a dual purpose when held in ... hold it on for 3 seconds twice before moving to the next button . Once done , put the batteries back and it should work . My sinotec remote seemed to have died after having my pocket router next too it and worked perfectly after doing it .
7/26/2021 3:46:34 PM • Televison &... • Answered 2 days ago
0helpful
1answer

Samsung ua50f5500 TV. Why does it keep turning off and on?

The power supply is failing.
7/25/2021 2:55:52 PM • Televison &... • Answered 3 days ago
0helpful
1answer

My Sukam falcom plus inverter charging light is blinking from hours what does that mean and it's not able to support even a fan when the mains go off.

Battery is low all though inverter charging light not blinking is that something goes wrong?
7/25/2021 1:57:38 PM • Televison &... • Answered 3 days ago
0helpful
1answer
0helpful
1answer

Mitsubishi LT-52149. Why doesn't it turn on?

1. Open Internal fuse 2. Power supply failure
7/24/2021 3:03:01 AM • Televison &... • Answered on Jul 24, 2021
0helpful
2answers

No enciende tv Sylvania LD190SS1 solo led rojo

Could be an open internal fuse
7/23/2021 4:32:46 PM • Televison &... • Answered on Jul 23, 2021
0helpful
2answers

I connected my 32" Funai LCD TV to PC CPU with VGA cable. I could watch the movie once. However, not able to get the connection again. TV gives message "Not Support". Do i have to change the settings

Make sure your VGA chord is connected to both TV and Computer. Right click on your desktop and go to screen resolutions. Click on Connect to a Projector and click the Duplicate icon.
7/23/2021 11:05:22 AM • Televison &... • Answered on Jul 23, 2021
0helpful
2answers

Sony KD60X690E Won't Stay Powered On

Not sure your skill level at repairing electronics, but I will include some basics if you are able to do some soldering.I have worked on many TV's and the issue you are describing is typically one of two things.FIRST take the back off your TV have a look at the power supply look for the capacitors (I have attached a photo and the items circled in red are the main capacitors to focus on) look to see if any of them appear to be bulging. A normal capacitor has an "x" marked on the metal top - this "x" should be flat or even a bit caved in. If it is round and popping up then that capacitor should be replaced. You can check the printed uf on the side and voltage (such as 1000 uf / 50v). Then look them up/order them from a place like mouse com or digikey com. Secondly the other common issue I find is a "cold" or broken solder joint. Take the power supply out of the TV look at the back of the board with a magnifying lens or watch repair glasses. Look very closely over the solder joints for cracks or breaks. In particular focus on the solder connections of the 3 pins transistors attached to the heatsinks. (In the image I attached they are the yellow circled items but look on the back of the power supply to where these pins attach on the green bottom side).5f7dee65-902e-408a-bf21-d6f9260d03f3.jpg(For some reason it seems like the attached image is showing as very low quality - here is an external like if it will allow me to link one: https://i.ibb.co/2vcRq9v/Sony-KD-60-X690-E-PSU.jpg )
7/23/2021 10:28:04 AM • Televison &... • Answered on Jul 23, 2021
Not finding what you are looking for?
Zio Corporation Dazzle Digital Video Creator 80 (DM-5400) Video Capture Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Zio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76703 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6304 Answers

Are you a Zio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zio Televison & Video

  • Zio Televison & Video

Most Popular Question

need download driver dazzle video

  • Televison & Video
Loading...