Elite VMAX Series Electric Screen Projector Screen - Answered Questions & Fixed issues
Elite SL3000UL stopped working after a thunder storm. The unit has power but no led's are lit.
It is worth checking if there is a fuse inside the Elite SL3000UL. If there is, the unit may have been damaged by a lightning strike or a power surge. If there is no fuse, it could still be a control board failure, a surge suppressor failure, or another related issue. To investigate further, you will need to consult the manufacturer or contact a certified electrician for help.
Kenmore Elite HE5T Front Load Washer Error Code F22, Door Latch, i replaced with a new one, still have the same Error Code, does this mean i have a faulty CCU?
Hi, if you don,t have a manual to refer to, take the number on your washing machine, this will indicate the model and make, and locate your helpline, the number should also be on your washing machine, either next to the door, or on the back or bottom front. i hope this helps
How to remove child lock from BELTEK TV?
general steps:
Get the TV remote control and push the "Menu" button and select "Options".
Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip".
Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button.
Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV.
Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control.
If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.
4/22/2024 8:10:04 PM •
Televison &...
•
Answered
3 days ago
•
16 views
How to pairing Ruwido Amadeus R 9710 to tv?
To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps:
Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly.
Switch on your TV: Ensure your TV is turned on.
Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice.
Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted.
Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list.
Bed.-Anl. H2 Version1 (ruwido.com)
4/21/2024 7:58:23 PM •
Televison &...
•
Answered
on Apr 21, 2024
•
14 views
Not finding what you are looking for?