Sharp XE-A404 PC Desktop - Page 9 - Answered Questions & Fixed issues

0helpful
1answer

Hi please tell me what is the difference between Sharp XE-A203 and XE-A202 Thanks

Usually if you do model A v. model B in Google, it will show the difference. In this case it doesn't. You would have to read both manuals. It may just be a year or two newer. The easy way would be to ask a Sharp POS dealer https://www.manualslib.com/manual/324804/Sharp-Xe-A202.html?page=7#manual https://wiki.hacdc.org/images/2/29/Cas_man_XEA203.pdf ..
1/20/2021 11:41:39 PM • Retail Supplies • Answered on Jan 20, 2021 • 31 views
0helpful
1answer

Hi there. I have a star wars a new hope 70 pound jackpot fruity. Have been playing it using 2 pound coins since the old pound coin became void. Since then if I gain any wins I transfer to bank so the machine doesn't pay out ( dumped hopper and cashed in old pound coins.) Problem is my son was playing it unattended and has pressed cash out. Now the alarm is sounding saying call manager refill 35 pounds which I cannot do due not having any. I want the coin mech changed over but cannot open the front. I have the key but its being stubborn to open. Is there anything else I can do to solve it without having to obtain 35 old pound coins to refill it please help

I used to have a pub with gaming machines and they were always refilled from the rear? Try disconnecting it from the mains for a couple of days. It probably has a small backup battery, but it may deplete during that time. Then the alarm should only go off when it comes to payout time. The circular pin tumbler locks are temperamental at the best of times and the tolerance to the locking bar is very tight. Normally you have to press the door hard and jiggle the key. The locks are easy to source and easy to replace one you get in. Or you could just drill it outwith a 3/8 carbide drill. ..
1/5/2021 5:36:25 PM • Retail Supplies • Answered on Jan 05, 2021 • 18 views
0helpful
1answer

Casio te-8000f. Why isn't it working?

Your register is on the initialisation screen. This means it is ready for programming. This happens if the battery has not been replaced on time (usually about every five years). If the power is turned off when the battery is flat or faulty, the memory is cleared and all of your programming is lost. There is a slim chance that you still have the programming if the battery is not completely dead. Try this- 1.Turn power switch off. 2. Hold RECEIPT FEED button down while you turn power on. Keep holding the button for 5 seconds, then let go. 3. You should see the copyright message. 4. Press SUBTOTAL (or ST) 5. You should see a message asking for flag clear or init2. Make sure FLAG CLEAR is highlighted and press the YES button on the keyboard. 6. The register will now leave init mode and you can select register mode. You may have to sign on with your code or press the clerk button (however you normally sign on to use the machine). If the text is scrambled, or your product buttons do not work, you have lost the program and it will need full reprogramming. Either way, leave it turned on to charge the battery and see a dealer about having the battery (internal) checked.
1/3/2021 11:30:12 PM • Retail Supplies • Answered on Jan 03, 2021 • 78 views
0helpful
2answers

Casio pcr-t-465 (cash register). Why does screen show apap-end e14?

E14 is that the Receipt paper roll needs changing! http://office.manualsonline.com/manuals/mfg/casio/pcrt465.html?p=83 ..
12/26/2020 12:20:01 AM • Retail Supplies • Answered on Dec 26, 2020 • 79 views
0helpful
1answer

How to print old month total on a BMC CR2780 cash register

Print a Z reading and that will print a total of what has not already been subject to a Z reading in the past.
12/16/2020 11:01:07 AM • Retail Supplies • Answered on Dec 16, 2020 • 29 views
0helpful
1answer

Error 053 on cash adder fruit machine. How do I fix this? I'm new to owning a fruit machine and didn't have a manual.

wow and I know no one here that owns one either
12/11/2020 10:43:17 AM • Retail Supplies • Answered on Dec 11, 2020 • 67 views
0helpful
1answer

Why does my office deli vending machine vend the wrong selection and sometimes multiple spots at a time?

Because it is defective
12/8/2020 4:19:52 PM • Retail Supplies • Answered on Dec 08, 2020 • 70 views
0helpful
2answers

Can I buy or rent shipping containers?

Yes!You can either rent or buy them, look at this:http://www.portcontainers.com/
12/7/2020 1:27:07 PM • Retail Supplies • Answered on Dec 07, 2020 • 691 views
0helpful
2answers

What is the biggest shipping container?

Here is a great link about shipping container sizes: http://www.shippingcontainers24.com/dimensions/company/
12/7/2020 1:23:28 PM • Retail Supplies • Answered on Dec 07, 2020 • 728 views
0helpful
2answers

What is the smallest shipping container?

Here's a website, with the smallest containers in the market:http://www.abccontainers.com.au/container-type/small-shipping-containers
12/7/2020 1:19:40 PM • Retail Supplies • Answered on Dec 07, 2020 • 696 views
0helpful
1answer

Can I reprint a z report from nov 2019 I have Casio SE-S800 I am n the process of doing year end reports, I know the date I need

A Z zero's the readings. An X can be repeated.
12/5/2020 10:21:35 AM • Retail Supplies • Answered on Dec 05, 2020 • 157 views
0helpful
1answer
0helpful
1answer

How to exit error code e004 on Casio to 6500b cash register

Press SUB TOTAL. If it still gives error, you probably let the battery go flat or you haven't changed it on time (every 5 years) and the programming may have been lost
11/30/2020 9:36:36 AM • Retail Supplies • Answered on Nov 30, 2020 • 51 views
0helpful
2answers

MY SHARP ER1911S CASH REGISTER DRAWER WONT OPEN ,NO MATTER WHAT KEY I PRESS .IT WAS OK AND ONE DAY IT STARTED DOING THIS

It needs a new solenoid catch which is at the back of the drawer. There should be a catch underneath to manually open it.
11/21/2020 9:09:48 AM • Retail Supplies • Answered on Nov 21, 2020 • 30 views
0helpful
2answers

All modes in ER 430m cash register dispaly CLOSED

YOU NEED TO ASK THE MANUFACTURER WE HAVE NO CLUE
2/19/2021 10:03:12 AM • Retail Supplies • Answered on Feb 19, 2021 • 42 views
0helpful
1answer

SAM4s ER-5115ii. My receipt lines are overlapped. How do I realign the printer?

Remove the till roll and find out where is is binding. Also clean the feed rollers. That only happens for the two reasons above.
10/29/2020 9:39:07 PM • Retail Supplies • Answered on Oct 29, 2020 • 35 views
Not finding what you are looking for?
Sharp XE-A404 PC Desktop Logo

161 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Retail Supplies Experts

k24674

Level 3 Expert

8092 Answers

Electroboy
Electroboy

Level 3 Expert

1888 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Sharp Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...