20 Most Recent Dell Dimension 9200 PC Desktop Questions & Answers

blue screen is an indication of failed hard drive take it to an it specialist and have the problem properly diagnosed

Dell Dimension... • Answered on Jun 25, 2017

need more details on the issue u are facing

Dell Dimension... • Answered on Dec 27, 2016

If there is space in another computer you have. just take out the hard drive from the Dell and put it in the other computer. It will have a new drive letter and you'll be able to retrieve more than just pictures from it.

Dell Dimension... • Answered on May 29, 2016

remove ram and listen beep codes from the system ......still no beeps from the system .....the problem with motherboard only

Dell Dimension... • Answered on Jan 12, 2016

Hello, Go here for a manual. Product Support

Dell Dimension... • Answered on Nov 01, 2015

That means your computer is not reading the Hard Drive. Open the computer and make sure it is plugged in to the Power and the Line to your motherboard is connected correctly

Dell Dimension... • Answered on Oct 22, 2014

An Amber blinking power button indicates a low voltage problem. This can be caused by a defective power supply or a defective motherboard. Remove any PCI cards like modem, video card, sound card, etc... Remove the memory modules and disconnect cables to CD/DVD drives. Look at the USB ports to see if any are damaged.

Dell Dimension... • Answered on Oct 09, 2014

Several possible reasons, best (if not under warranty) to check RAM memory for faulty one, seems like possible memory of AC issues.

Dell Dimension... • Answered on Aug 26, 2014

Gonna have to reset your jumpers on the MB.... taking the battery out on this unit will not work, the jumpers have to be reset. WARNING!!!! If you are not comfortable and familure with reseting your jumpers I recomend taking it to a pro... you can cause alot of damage some unrecoverable...

Dell Dimension... • Answered on Dec 27, 2013

I would say it is in the Hibernation Mode To get it out of this mode you need to go to your Control Panel, open "POWER OPTION'S" and deselect the Hibernation mode then reboot.

Dell Dimension... • Answered on Sep 30, 2013

Does it make any noises? Does the display have any writing on it? What is happening? If you decide that you can't answer these questions, just throw the computer away and buy a new one.

Dell Dimension... • Answered on Sep 23, 2013

Remove the power lead, open case and remove the "penny" battery, then press the power button a couple of times. Replace the battery and then the power lead. CMOS is now reset.

Dell Dimension... • Answered on Sep 23, 2013

roop_gill, Try the steps mentioned below. Run it in normal mode, when you see the cursor press CTRL + ALT + DEL if the task manager pops up, go into the application tab, click on new task, type explorer.exe and hit enter. If this does not work then in safe mode update your video driver.Thank You,Dell-Jesse LDell Social Media and Communities

Dell Dimension... • Answered on Feb 04, 2013

WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. http://www.kitchentablecomputers.com/static.php - rules Only work inside the computer case when the power has been switched off and disconnected. Never open the power source. Some of the below steps recommend removing physical parts within the computer. While in the computer it is highly recommend that you be aware of ESD and its potential hazards Remove the memory modules from their slots. Take the opportunity to clean the slots on the motherboards and the memory module connectors. Use compressed air to blow dust away and clean contacts with a soft cloth. Do not use a metallic vacuum cleaner if it touches any component it may create a short and cause damage to the motherboard or other components. Do not use solvent that may attract dust and never poke things like cotton buds in to slots. lightly rub an alcohol (Methylated Spirits) on a cloth not to hard let the alcohol do the work on the copper gold or silver tabs and r Allow the pins to dry. They will air dry in a matter of minutes. If reseating the memory did not resolve the issue try swapping the location of the memory. If you have only one stick of memory in the computer try moving it to another slot and then boot the computer. Check the memory module and memory slot contacts. They are either copper tin or gold. The colour will tell you which they are. Mixing tin and gold can result in corrosion that prevents proper contact. Look for any sign of physical damage to the memory module, memory slots or the motherboard. Reseat the memory modules. You should hear an audible click when they are in place. Do not use too much force to reseat the memory module in to the slot this can cause damage to the module, slot or motherboard. The hardware that you are trying to access is damaged or failing. The device drivers for the hardware are faulty or incompatible. Could be a problem with the Hard Drive or the Hard drives PCB http://www.onepcbsolution.com/ There is a connection problem such as a bad cable for internal hard drives Test all power and data leads that attach to your hard drive IDE,SATA the leads from your MOTHERBOARD TO THE HARD DRIVE make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty if its a flat 40pin ide this will be the first to fail Make sure all leads that are attached to your drives dvd\cd and floppy (If Applicable) have secure connections and are not faulty. or just replace them they could be faulty a computer needs power and data to travel through every working device and continue its cycle and have an end so any faulty leads will end up with a computer error Hope this helps. Hope it helps.

Dell Dimension... • Answered on Jan 10, 2013

You have to format a hard drive with a third party disk unless its a usb data drive Restart your computer During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS then using the arrow keys navigate to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos restart this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating system. Note: After you have loaded the operating system you should go back and change the first boot device to failsafe or optimised defaults after windows has loaded If you are putting windows XP on your computer your computer will automatically restart it might restart 2 times one to finish the installation the next will be because the operating system is loaded and will boot from your cd. hope this helps

Dell Dimension... • Answered on Nov 20, 2012

Not finding what you are looking for?
Dell Dimension 9200 PC Desktop Logo

119 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts


Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Brad Brown

Level 3 Expert

18631 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dimension Dell

  • Dimension Dell

Most Popular Question

got hit f1 tab get computer stared

  • Computers & Internet